Skip to main content
Log in
Schneider Electric ILS2P852PB1A0

Schneider ILS2P852PB1A0 Lexium integrated stepper motor, 4 N.m, 48 V

MPNILS2P852PB1A0
Obsolete

Schneider ILS2P852PB1A0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,753.00Ref. price · indicative, final on quote
Schneider Electric ILS2P852PB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2P852PB1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeShort circuit of the output voltage Overload of output voltage Safe torque off
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2P852PB1A0 additional specifications
ParameterValue
Supply voltage48 V 24 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V for safety input 2 mA at 24 V for 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
Network number of phasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet Powerlink, integrated
Mounting supportFlange
Mounting holes diameter6.5 mm
Number of mounting holes4
Circle diameter of the mounting holes99 mm
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 1000 m without derating
Vibration resistance20 m/s² (f= 10...500 Hz) 10 cycles conforming to EN/IEC 60068-2-6
Centring collar depth2 mm
StandardsIEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN 61800-3:2001, second environment EN/IEC 50178 EN 61800-3 : 2001-02 EN/IEC 61800-3
Length170.6 mm
MarkingCE
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length30 mm
Holding brakeWithout
Nominal speed180 rpm at 24 V 360 rpm at 48 V
Rotor inertia2.2 kg.cm²
Accuracy error+/- 6 arc min
Holding torque4 N.m
Nominal torque4 N.m
Shaft diameter12 mm
Device short nameILS
Motor flange size85 mm
Peak stall torque4 N.m
Transmission rate100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa170 N (tensile force) 30 N (force pressure)
Number of motor stacks2
Continuous stall torque4 N.m
Maximum radial force fr100 N
Centring collar diameter60 mm
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-25...70 °C
Ambient air temperature for operation40...55 °C (with power derating of 2 % per °C) 0...40 °C (without derating)
Permissible ambient air temperature around the device105 °C power amplifier 110 °C motor

Product details

Overview

The ILS2P852PB1A0 is a Lexium integrated drive stepper motor from Schneider, delivering 4 N.m of torque on a 48 V supply with a 6-pole 3-phase stepper motor. Speed is supply-dependent: 180 rpm at 24 V, 360 rpm at 48 V. It integrates Ethernet Powerlink for motion bus communication and carries a CE mark, with compliance to IEC 61800-3 (second environment).

The ILS2P852PB1A0 is an active catalogue item in the Lexium integrated drive range. Availability is standard through distribution; an RFQ confirms current lead time and pricing for the exact build code.

MPN
ILS2P852PB1A0