Skip to main content
Log in
Schneider Electric ILS2P853PC1A0

Schneider ILS2P853PC1A0 Lexium Integrated Stepper Motor, 6 N.m, 24 V DC

MPNILS2P853PC1A0
Obsolete

Schneider ILS2P853PC1A0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,994.00Ref. price · indicative, final on quote
Schneider Electric ILS2P853PC1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2P853PC1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeShort circuit of the output voltage Safe torque off Overload of output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2P853PC1A0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceEthernet Powerlink, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionIndustrial connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsEN 50347 EN 61800-3:2001, second environment EN/IEC 50178 EN 61800-3 : 2001-02 IEC 60072-1 IEC 61800-3, Ed 2 EN/IEC 61800-3
Length7.9 in (200.6 mm)
MarkingCE
Category18288 - LEXIUM INTEGRATED DRIVES II
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed100 rpm 24 V 200 rpm 48 V
Rotor inertia3.3 kg.cm²
Accuracy error+/- 6 arc min
Holding torque53.1 lbf.in (6 N.m)
Nominal torque53.1 lbf.in (6 N.m)
Shaft diameter0.6 in (14 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque53.1 lbf.in (6 N.m)
Transmission rate100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks3
Continuous stall torque53.1 lbf.in (6 N.m)
Maximum radial force fr110 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed2000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2P853PC1A0 is a Schneider Lexium integrated drive — a 3-phase stepper motor with onboard drive electronics, order code ILS2P853PC1A0. It delivers 6 N.m of holding torque from a 24 V DC supply, integrates Ethernet Powerlink communication, and carries an IP41 rating for cabinet-mount applications. The unit is CE marked and designed for single-phase DC networks, with a flange mounting style and an industrial connector interface.

This integrated drive combines a 3-phase stepper motor and its drive electronics in a single housing, eliminating the separate drive cabinet and cabling. The 6 N.m holding torque (53.1 lbf.in) positions loads up to that static limit without an external brake, while the rotor inertia of 3.3 kg.cm² governs acceleration and settling time in point-to-point moves. Position feedback is via index pulse, giving a resolution of 20000 points per turn — enough for many indexing and positioning tasks without an external encoder. The drive accepts 24 V DC supply and provides short-circuit and overload protection on the output voltage, plus Safe Torque Off for safety circuits. Communication is over Ethernet Powerlink at the fieldbus level, with an RS485 serial interface supporting Modbus RTU at 9.6, 19.2, and 38.4 kbaud for configuration or legacy device integration.

Applications

Lexium integrated drives of this class are used in packaging and labeling machines, pick-and-place cells, textile equipment, and small assembly stations where a compact, single-cable motion axis is needed. The integrated design reduces panel space and wiring time compared to a separate drive and motor combination.

Within Schneider's Lexium integrated drive range, the ILS2P853PC1A0 sits at the medium-torque, medium-speed segment — specified by machine builders who need a self-contained stepper axis with fieldbus connectivity and do not require a gearbox or holding brake. It competes with other integrated stepper drives in the 24 V DC, 6 N.m class.

The ILS2P853PC1A0 is an active Schneider product, typically sourced to order through distribution. An RFQ is the recommended path to confirm current lead time, minimum order quantity, and firm pricing — prices fluctuate and are quoted per enquiry.

MPN
ILS2P853PC1A0