Skip to main content
Log in
Schneider Electric ILS2T852PB1A0

Schneider ILS2T852PB1A0 Lexium Integrated Drive, 24 V, 4 N·m, Modbus TCP

MPNILS2T852PB1A0
Obsolete

Schneider ILS2T852PB1A0 — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$1,690.00Ref. price · indicative, final on quote
Schneider Electric ILS2T852PB1A0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

ILS2T852PB1A0 key specifications
ParameterValue
Motor type3-phase stepper motor
Network typeDC
Winding typeMedium speed of rotation and medium torque
Feedback typeIndex pulse
Gear box typeWithout
Protection typeOverload of output voltage Safe torque off Short circuit of the output voltage
Type of coolingNatural convection
Range of productLexium integrated drive
Input (output type)4 signals (each be used as input or output)
Product or component typeMotion integrated drive
Supply voltage limits18...55 V
Discrete output voltage23...25 V

All specifications

ILS2T852PB1A0 additional specifications
ParameterValue
Supply voltage24 V 48 V
Voltage state 0 guaranteed-3...4.5 V
Voltage state 1 guaranteed15...30 V
Current consumption5000 mA maximum continuous
Discrete input current10 mA at 24 V safety input 2 mA at 24 V 24 V signal interface
Maximum switching current100 mA per output 200 mA total
Number of motor poles6
PhasesSingle phase
IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5 IP54 total except shaft bushing: conforming to EN/IEC 60034-5
Commissioning interfaceRS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Communication interfaceModbus TCP, Integrated
Mounting supportFlange
Mounting holes diameter0.3 in (6.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.9 in (99 mm)
Electrical connectionPrinted circuit board connector
Shock resistance150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative humidity15...85 % without condensation
Operating altitude<= 3280.84 ft (1000 m) without derating
Vibration resistance20 m/s² 10...500 Hz) 10 cycles EN/IEC 60068-2-6
Centring collar depth0.08 in (2 mm)
StandardsIEC 61800-3, Ed 2 EN 50347 IEC 60072-1 EN 61800-3:2001, second environment EN/IEC 50178 EN/IEC 61800-3 EN 61800-3 : 2001-02
Length6.7 in (170.6 mm)
MarkingCE
CategoryUS1PC5618288
Shaft endUntapped
Second shaftWithout second shaft end
Shaft length1.2 in (30 mm)
Holding brakeWithout
Nominal speed180 rpm 24 V 360 rpm 48 V
Rotor inertia2.2 kg.cm²
Accuracy error+/- 6 arc min
Holding torque35.4 lbf.in (4 N.m)
Nominal torque35.4 lbf.in (4 N.m)
Shaft diameter0.5 in (12 mm)
Device short nameILS
Motor flange size3.3 in (85 mm)
Peak stall torque35.4 lbf.in (4 N.m)
Transmission rate10, 100 Mbits
Service life in hours20000 h bearing
Associated fuse rating16 A
Maximum axial force fa170 N tensile force) 30 N force pressure)
Number of motor stacks2
Continuous stall torque35.4 lbf.in (4 N.m)
Maximum radial force fr100 N
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed3000 rpm
Speed feedback resolution20000 points/turn
Ambient air temperature for storage-13...158 °F (-25...70 °C)
Ambient air temperature for operation104...131 °F (40...55 °C) (with power derating of 2 % per °C) 32...104 °F (0...40 °C) (without derating)
Permissible ambient air temperature around the device221 °F (105 °C) power amplifier 230 °F (110 °C) motor

Product details

Overview

The ILS2T852PB1A0 is a Schneider Lexium integrated drive combining a 6-pole 3-phase stepper motor with onboard drive electronics, rated 24 V DC and delivering 4 N·m of torque. It communicates via Modbus TCP and carries an IP41 rating for protected indoor installation. The unit mounts via flange and includes a 20000-points-per-turn encoder for closed-loop positioning.

Alternatives & selection

The ILS2T852PB1A0 delivers 4 N·m torque at 24 V, with a top speed of 180 rpm. It offers 20000 points/turn resolution.

MPN
ILS2T852PB1A0