Schneider Electric ILT2A574MB1A
MPNILT2A574MB1A
Obsolete
Motion integrated drive, Lexium integrated drive, ILT with stepper motor, 24VDC to 48VDC, CANopen, 1.77Nm
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Motor type | 2-phase stepper motor |
| Network type | DC |
| Winding type | Medium speed of rotation and medium torque |
| Feedback type | Index pulse |
| Gear box type | Without |
| Protection type | Short circuit of the output voltage Overload of output voltage |
| Range of product | Lexium integrated drive |
| Input (output type) | 4 signals (each be used as input or output) |
| Product or component type | Motion integrated drive |
| Supply voltage limits | 12...48 V |
| Discrete output voltage | 5...24 V |
| Supply voltage | 24...48 V |
All specifications
| Parameter | Value |
|---|---|
| Voltage state 0 guaranteed | = 2.2 V |
| Current consumption | 3.2 A maximum continuous |
| Discrete input current | 1.75 mA at 24 V for 24 V signal interface |
| Maximum switching current | 275 mA four channels 600 mA single channel |
| IP degree of protection | IP20 total except shaft bushing: conforming to EN/IEC 60034-5 IP41 shaft bushing: conforming to EN/IEC 60034-5 |
| Communication interface | CANopen DS402 |
| Mounting support | Flange |
| Electrical connection | Flying leads |
| Relative humidity | 15...85 % without condensation |
| Operating altitude | <= 1000 m without derating |
| Standards | EMC immunity IEC 61000-4-2 EN 61000-3-3:1995, A1:2001, A2:2005 IEC 61000-4-4 IEC 61000-4-5 EN 61000-3-2 : 2006 IEC 61000-4-3 IEC 61000-4-11 IEC 61000-4-6 EN 55011:2007, A2:2007 for Group 1, Class A |
| Length | 134.15 mm |
| Marking | CE |
| Holding brake | Without |
| Nominal speed | 300 rpm at 24 V 450 rpm at 48 V |
| Rotor inertia | 0.76 kg.cm² |
| Accuracy error | +/- 0.3 arc/min |
| Holding torque | 1.77 N.m |
| Device short name | ILT |
| Motor flange size | 57 mm |
| Peak stall torque | 1.77 N.m |
| Transmission rate | 10, 20, 50, 100, 125, 250, 800, 1000 kbauds |
| Service life in hours | 20000 h |
| Continuous stall torque | 1.77 N.m |
| Speed feedback resolution | 1000 steps 10000 steps 12800 steps 1600 steps 200 steps 2000 steps 20000 steps 25000 steps 25600 steps 3200 steps 400 steps 40000 steps 5000 steps 50000 steps 51200 steps 6400 steps 800 steps |
| Ambient air temperature for storage | -25...70 °C |
| Ambient air temperature for operation | 50...65 °C (with power derating of 2 % per °C) 0...50 °C (without derating) |
| Permissible ambient air temperature around the device | 100 °C |
MPN
ILT2A574MB1A