Schneider Electric LAD9AP3D1 Control Connection Module

Specifications

Identification

LAD9AP3D1 — Identification
Parameter	Value
Product / component type	Control connection module
Product range	TeSys D

Electrical

LAD9AP3D1 — Electrical
Parameter	Value
Rated operational voltage (Ue)	690 V
Rated current (In)	18 A per starter 60 A for power circuit conforming to IEC 60439-1 60 A per sub-base conforming to IEC 60439-1
Network frequency	50/60 Hz

Cable & Connector

LAD9AP3D1 — Cable & Connector
Parameter	Value
Terminal connection capacity	Control circuit: spring terminal 2 cable(s) 1.5 mm² flexible with cable end Control circuit: spring terminal 2 cable(s) 2.5 mm² flexible Control circuit: spring terminal 2 cable(s) 2.5 mm² solid Power circuit: spring terminal 3 cable(s) 16 mm² flexible with cable end Power circuit: spring terminal 3 cable(s) 25 mm² flexible Power circuit: spring terminal 3 cable(s) 25 mm² solid

Mechanical

LAD9AP3D1 — Mechanical
Parameter	Value
Mounting mode	Fixed

Environmental

LAD9AP3D1 — Environmental
Parameter	Value
IP protection rating	IP40
Operating ambient temperature	-5...40 °C wall mounted -5...60 °C floor mounting
Storage ambient temperature	-40...70 °C

Approvals

LAD9AP3D1 — Approvals
Parameter	Value
Conformance standards	IEC 60439-1

Product details

What This Module Does

The LAD9AP3D1 is a control connection module from the TeSys D range, designed to wire the control circuit of a direct motor starter using a GV2ME or GV3P circuit breaker. It carries 18 A per starter and handles 60 A for the power circuit per IEC 60439-1, with a rated insulation voltage of 750 V and operational voltage of 690 V.

Mounting and Wiring

Mounts fixed on a plate or on 2 x 35 mm symmetrical DIN rail — the same footprint as the TeSys D contactor range, so it fits into existing panel layouts without re-drilling. Spring terminals on both control and power circuits: control side accepts 2 x 1.5 mm² flexible with ferrule, or 2 x 2.5 mm² solid; power side takes up to 3 x 25 mm² solid or flexible.

Sourcing Reality — Obsolete Part

We source it through independent surplus channels; quantities are lot-specific and confirmed at RFQ.

Frequently asked questions

How do I get current pricing and availability for LAD9AP3D1?

Submit an RFQ through this listing.

What standards does the LAD9AP3D1 comply with?

It is designed to IEC 60439-1 for low-voltage switchgear and controlgear assemblies, with pollution degree 3 and a rated short-time withstand current of 9.1 kA for 70 ms.