Skip to main content
Log in
Schneider Electric LC1D40AMD

Schneider LC1D40AMD TeSys Deca contactor, 40 A, 220 V DC coil (discontinued)

MPNLC1D40AMD
Active

Schneider Electric TeSys Deca LC1D40AMD contactor, 3-pole, 40 A AC-3, 220 V DC standard coil, screw clamp terminals, IP20, rail/plate mount, discontinued.

$265.25Ref. price · indicative, final on quote
Schneider Electric LC1D40AMD datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LC1D40AMD key specifications
ParameterValue
Range of productTeSys Deca
Product or component typeContactor
Climatic withstandIACS E10 exposure to damp heat IEC 60947-1 Annex Q category D exposure to damp heat
[Ue] rated operational voltagePower circuit Power circuit 10 MOhm for signalling circuit
Poles description3P
Utilisation categoryAC-3 AC-1 AC-4
IP degree of protectionIP20 front face IEC 60529
Mounting supportRail Plate
Operating altitude0...9842.52 ft (0...3000 m)
Depth4.7 in (120 mm)
Width2.2 in (55 mm)
Height4.8 in (122 mm)

All specifications

LC1D40AMD additional specifications
ParameterValue
StandardsEN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 CSA C22.2 No 14 UL 60947-4-1 IEC 60335-2-40:Annex JJ UL 60335-2-40:Annex JJ IEC 60335-1:Clause 30.2
RangeTeSys TeSys Deca
CategoryUS10I1222358
Fire resistance1562 °F (850 °C) IEC 60695-2-1
Flame retardanceV1 conforming to UL 94
Non-overlap time1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
Device short nameLC1D
Protective treatmentTHIEC 60068-2-30
Contactor applicationMotor control Resistive load
Mechanical robustnessVibrations contactor open 2 Gn, 5...300 Hz) Vibrations contactor closed 4 Gn, 5...300 Hz) Shocks contactor closed 15 Gn for 11 ms) Shocks contactor open 10 Gn for 11 ms)
Permissible ambient air temperature around the device-40...140 °F (-40...60 °C) 140...158 °F (60...70 °C) with derating

Product details

Overview

The LC1D40AMD is a Schneider TeSys Deca 3-pole contactor rated 40 A in AC-3 duty, energised by a 220 V DC standard coil and terminated with screw clamp terminals. It carries certifications including CCC, UL, CSA, CE, and UKCA, and is sealed to IP20 for panel-mount use on a rail or plate.

Schneider lists the LC1D40AMD as discontinued; remaining units are available through surplus and broker channels rather than current distribution. For a panel originally built around this 40 A DC coil contactor, the LC1D65A6CD is a same-frame peer rated 65 A — it shares the same 55.88 mm width and 119.38 mm depth, so it drops into the same DIN footprint without rewiring the mounting holes, but the coil voltage and control circuit must be verified.

MPN
LC1D40AMD