Skip to main content
Log in
Schneider Electric LC1F1504E7

Schneider LC1F1504E7 TeSys F Contactor, 250A AC-1

MPNLC1F1504E7
Obsolete

Schneider Electric TeSys F LC1F1504E7, 4-pole contactor, 250 A AC-1 at ≤440 V, 48 V AC coil.

$768.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

LC1F1504E7 key specifications
ParameterValue
Range of productTeSys F
Control circuit typeAC at 40...400 Hz
Product or component typeContactor
Coil voltage48 V AC 40...400 Hz
Voltage1000 V conforming to IEC 60947-4-1 1500 V conforming to VDE 0110 group C
Control circuit voltage limitsOperational: 0.85...1.1 Uc 40...400 Hz (at 55 °C) Drop-out: 0.2...0.55 Uc 40...400 Hz (at 55 °C)
[Ue] rated operational voltage<= 460 V DC
[Uimp] rated impulse withstand voltage8 kV
[Icw] rated short-time withstand current1200 A 40 °C - 10 s 700 A 40 °C - 30 s 600 A 40 °C - 1 min 450 A 40 °C - 3 min 350 A 40 °C - 10 min
Breaking capacity1200 A conforming to IEC 60947-4-1
[Ie] rated operational current250 A (at <40 °C) at <= 440 V AC-1
[Ith] conventional free air thermal current250 A (at 40 °C)

All specifications

LC1F1504E7 additional specifications
ParameterValue
Inrush power in770 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Power dissipation per pole22 W AC-1
Power pole contact composition4 NO
Hold-in power consumption in8.1 VA, 40...400 Hz cos phi 0.9 (at 20 °C)
Poles description4P
Utilisation categoryAC-1
IP degree of protectionIP2X front face with shrouds conforming to IEC 60529 IP2X front face with shrouds conforming to VDE 0106
Mounting supportPlate
Connections - terminalsControl circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1...4 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1...4 mm²solid without cable end Power circuit: bar 2 cable(s) - busbar cross section: 25 x 3 mm Power circuit: lugs-ring terminals 1 cable(s) 120 mm² Power circuit: connector 1 cable(s) 120 mm² Power circuit: bolted connection
Operating altitude3000 m without derating
Depth171 mm
Width200.5 mm
Height170 mm
Mechanical durability10 Mcycles
StandardsIEC 60947-4-1 JIS C8201-4-1 EN 60947-4-1 IEC 60947-1 EN 60947-1
RangeTeSys
Operating time35 ms closing (at Uc) 130 ms opening (at Uc)
Heat dissipation5.9...7.2 W
Average impedance0.35 mOhm - Ith 250 A 50 Hz
Device short nameLC1F
Tightening torqueControl circuit: 1.2 N.m Power circuit: 18 N.m
Compatibility codeLC1F
Overvoltage categoryIII
Protective treatmentTH
Contactor applicationResistive load
Associated fuse rating160 A aM at 250 A gG at <= 440 V
Maximum operating rate2400 cyc/h 55 °C
Ambient air temperature for storage-60...80 °C
Ambient air temperature for operation-40...60 °C
Permissible ambient air temperature around the device60...70 °C at Uc

Product details

TeSys F 250 A contactor, 4 NO, 48 V AC coil

Schneider LC1F1504E7 is a TeSys F 4-pole contactor with 4 NO main poles, rated 250 A in AC-1 duty for resistive loads at up to 440 V. Control coil is 48 V AC at 40–400 Hz, drawing 770 VA inrush and 8.1 VA hold. Mechanical durability is 10 Mcycles. Rated breaking capacity is 1200 A per IEC 60947-4-1.

Line-down sourcing: end-of-life status

This contactor is classified end-of-life (EOL). No official direct replacement is designated. BOM lines depending on this part require requalification or a last-time-buy assessment. We source against an RFQ — submit the order code for lead time and availability via surplus or broker channels.

Mounting and connection detail

Mounts on a plate. Power connections accept a busbar (25 × 3 mm), lugs-ring terminals up to 120 mm², or bolted connection. Control circuit screw-clamp terminals accept 1 or 2 cables, 1–4 mm² solid or flexible. Tighten power circuit to 18 N·m, control circuit to 1.2 N·m. IP2X with shrouds on front face. Overvoltage category III. Operating altitude 3000 m without derating.

Frequently asked questions

What is the closest pin-compatible alternative to LC1F1504E7?

No official direct replacement is designated. Submit an RFQ for sourcing guidance.

What are the key ratings of LC1F1504E7?

250 A rated operational current in AC-1 (resistive) at ≤440 V, 4 NO poles, 48 V AC control coil at 40–400 Hz, 10 Mcycles mechanical durability, 1200 A breaking capacity.

What compliance documentation does this contactor meet?

Conforms to IEC 60947-4-1, JIS C8201-4-1, EN 60947-4-1, IEC 60947-1, EN 60947-1. Protective treatment TH. Overvoltage category III.

MPN
LC1F1504E7