The LC1G2654LSEN is a 4-pole power switching contactor from the TeSys Giga line, wired for AC-3 motor duty. The control circuit accepts 200…500 V AC or DC. Rated insulation voltage is 1000 V and the coil uses built-in bidirectional peak limiting.
Fit & Installation
Mounts on a plate (not direct DIN-rail—the Giga frame is bolt-down). Power terminals accept either busbars up to 32 × 10 mm or ring lugs up to 185 mm² per pole, with a pitch of 45 mm. Control circuit uses push-in connections for 0.2…2.5 mm² flexible wire. Auxiliary contacts are 1 NO + 1 NC, already built in. Tightening torque for the power terminations is 35 N·m—worth noting if you're using an impact driver; it's higher than a typical IEC contactor. The contactor meets EN/IEC 60947-4-1, UL 60947-4-1, CSA, and JIS, so it passes most panel approvals without extra paperwork.