The LC2K0601B7TQ is a TeSys K reversing contactor from Schneider Electric — a 3-pole device rated AC-3 at 6 A up to 440 V, with a 24 V AC coil and one NC auxiliary contact. That means less panel wiring and a smaller chance of cross-connection errors during build.
The AC-3 rating at 6 A is the motor-switching figure — it covers starting and disconnecting squirrel-cage motors under load. For a reversing contactor, AC-4 capability matters because reversing often involves counter-torque braking. The coil is 24 V AC — common in North American control transformers and European 24 V AC control circuits. IP20 finger protection (VDE 0106) means it's safe for open-panel mounting but not for washdown environments.
This is a panel-mount reversing contactor sized for motor control centers and industrial control panels. The dimensions — 2.2 in deep, 3.5 in wide, 2.3 in tall — fit standard 35 mm DIN rail or direct panel mounting. The preassembled busbar saves the step of wiring a separate reversing kit. Altitude rating is 2000 m without derating, so it's fine for most sites outside high-altitude installations.
Flame retardance is V1 per UL 94, with additional compliance to NF F 16-101 and NF F 16-102 (railway fire behavior standards). Protective treatment follows TC IEC 60068 and TC DIN 50016 for environmental resistance. The IP20 rating meets VDE 0106 for finger protection. These approvals cover the regulatory requirements for most industrial control panels in North America and Europe.