Skip to main content
Log in
Schneider Electric LC2K06013M7 — Contactors

Schneider TeSys K LC2K06013M7 Reversing Contactor, 6 A AC-3

MPNLC2K06013M7
Obsolete

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <=440 V 6 A, 1 NC, 220...230 VAC coil, IP20, preassembled with reversing power busbar.

Schneider Electric LC2K06013M7 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LC2K06013M7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K06013M7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4
LC2K06013M7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K06013M7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K06013M7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The Schneider Electric LC2K06013M7 is a TeSys K reversing contactor — a 3-pole unit rated for AC-3 duty at 6 A up to 440 V, with a 220...230 VAC coil and one NC auxiliary contact. It ships preassembled with the reversing power busbar, so you skip the busbar wiring step during panel build.

Integration notes

The preassembled reversing busbar saves one wiring step and reduces the chance of phase-reversal errors during commissioning. IP20 means no gasket or sealing required inside the enclosure, but keep it behind a panel door or cover for touch safety.

Frequently asked questions

What replaces the LC2K06013M7?

Schneider Electric has not published an official successor order code for this part. For a replacement, you would need to evaluate a current TeSys K or TeSys Deca reversing contactor with matching coil voltage and pole configuration — verify footprint and busbar fit before ordering.

What are the key ratings for the LC2K06013M7?

It is a 3-pole reversing contactor rated AC-3 at 6 A up to 440 V, with a 220...230 VAC coil and one NC auxiliary contact. The power circuit is rated for 690 V AC 50/60 Hz. Operating temperature range is -25 to 50 °C, and IP20 protection applies.

What compliance certifications does the LC2K06013M7 carry?

The part is rated V1 flame retardance per UL 94, and also meets NF F 16-101 and NF F 16-102 for railway rolling stock. IP20 is per VDE 0106. The protective treatment conforms to IEC 60068 and DIN 50016 for environmental resistance.

MPN
LC2K06013M7