Schneider Electric TeSys K reversing contactor, LC2K1210P72, 3P, AC-3 12A at 440V, 230V AC coil, preassembled reversing busbar, IP20.
| Parameter | Value |
|---|---|
| Product / component type | Reversing contactor |
| Series / range | TeSys |
| Application | Motor control Resistive load |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit |
| Utilisation category | AC-3 AC-4 AC-1 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 conforming to VDE 0106 |
| Operating altitude | 2000 m without derating |
| Mechanical robustness | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Protective treatment / pollution degree | TC conforming to IEC 60068 TC conforming to DIN 50016 |
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 90 mm |
| Height | 58 mm |
| Depth | 57 mm |
The Schneider Electric LC2K1210P72 is a TeSys K reversing contactor — a 3-pole unit rated for AC-3 duty at 12 A up to 440 V, with a 230 V AC coil. It ships preassembled with the reversing power busbar, so it's ready to drop into a panel for forward/reverse motor control without extra wiring.
It's sized for control panels where a single device handles forward/reverse switching of a motor load, common in conveyor drives, pump stations, and small hoists.
The manufacturer does not list a direct successor for this order code. For a replacement, you would need to evaluate a current TeSys K or TeSys Deca reversing contactor with matching pole count, coil voltage, and AC-3 current rating. Contact us with your application details for a cross-reference recommendation.
Width 90 mm, height 58 mm, depth 57 mm. These dimensions include the preassembled reversing busbar.
The contactor carries V1 flame retardance per UL 94, and complies with NF F 16-101 and NF F 16-102 for railway fire safety. IP20 per VDE 0106. Shock and vibration ratings per IEC 60068-2-27 and IEC 60068-2-6 are specified in the datasheet.
No related articles