Skip to main content
Log in
Schneider Electric LC2K16107B7 — Contactors

Schneider LC2K16107B7 TeSys K reversing contactor, 16 A, 24

MPNLC2K16107B7
Active

Schneider Electric TeSys K reversing contactor, 3P, AC-3 ≤440 V 16 A, 1 NO, 24 V AC coil.

Schneider Electric LC2K16107B7 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LC2K16107B7 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control
LC2K16107B7 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-4 AC-3
LC2K16107B7 — Contacts & Poles
ParameterValue
Pole configuration3P
LC2K16107B7 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LC2K16107B7 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LC2K16107B7 is a TeSys K reversing contactor from Schneider Electric — a 3-pole unit rated AC-3 at 16 A up to 440 V, with a 24 V AC coil and one normally open auxiliary contact. It comes preassembled with a reversing power busbar, so it's ready to drop into a panel for forward/reverse motor control of a small three-phase load like a conveyor or pump.

The AC-3 rating of 16 A at ≤440 V is the motor-switching current — it handles starting and plugging of a squirrel-cage motor up to roughly 7.5 kW at 400 V. The 24 V AC coil draws from a control transformer; verify the control circuit can supply the inrush without dropping below the pickup voltage.

Frequently asked questions

What is the closest alternative to the LC2K16107B7 in the TeSys family?

No official successor order code is recorded. A parametric match would need a 3-pole reversing contactor rated AC-3 16 A at ≤440 V with a 24 V AC coil and 1 NO auxiliary. The TeSys K series has been superseded by later TeSys ranges, but pin-compatibility and footprint should be verified against the specific panel layout.

What compliance documentation does Schneider provide for this part?

The part carries a V1 flame-retardance rating per UL 94 and meets NF F 16-101/102 for railway fire behavior. IP20 per VDE 0106. Protective treatment per IEC 60068 and DIN 50016. No RoHS or REACH statement appears in the record.

MPN
LC2K16107B7