Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 16 A, 1 NO, 110 V AC coil, preassembled with reversing power busbar.
| Parameter | Value |
|---|---|
| Product / component type | Reversing contactor |
| Series / range | TeSys |
| Application | Motor control |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit |
| Utilisation category | AC-4 AC-3 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 conforming to VDE 0106 |
| Operating altitude | 2000 m without derating |
| Mechanical robustness | Shocks contactor closed, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on X axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 |
| Protective treatment / pollution degree | TC conforming to IEC 60068 TC conforming to DIN 50016 |
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 90 mm |
| Height | 58 mm |
| Depth | 57 mm |
The Schneider Electric LC2K16107F7 is a TeSys K reversing contactor, 3P, rated for AC-3 duty at 16 A up to 440 V and AC-4 duty, with a 110 V AC coil. The 3 NO power poles handle the forward and reverse circuits, and the single NO auxiliary contact provides feedback or a holding circuit.
The IP20 finger-safe terminals (per VDE 0106) suit it for enclosed control panels where personnel access is restricted. Operating altitude is 2000 m without derating — fine for most industrial sites.
Schneider has not published an official successor order code for this part. A replacement must be selected based on the original ratings: reversing contactor, 3P, AC-3 16 A at 440 V, 110 V AC coil. The TeSys K series includes active reversing contactors with similar footprints; verify coil voltage and auxiliary contact configuration before substituting.
It is a 3-pole reversing contactor rated AC-3 at 16 A up to 440 V, with a 110 V AC coil. Power circuit rated 690 V AC 50/60 Hz. Includes one NO auxiliary contact. Preassembled with reversing power busbar.
No related articles