Schneider Electric TeSys K reversing contactor, LP2K09013BD3, 3P, AC-3 9 A at 440 V, 24 V DC coil, 1 NC auxiliary, preassembled with reversing power busbar.
| Parameter | Value |
|---|---|
| Product / component type | Reversing contactor |
| Series / range | TeSys |
| Application | Resistive load Motor control |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit |
| Utilisation category | AC-3 AC-1 AC-4 |
| Parameter | Value |
|---|---|
| Pole configuration | 3P |
| Parameter | Value |
|---|---|
| IP degree of protection | IP20 conforming to VDE 0106 |
| Operating altitude | 2000 m without derating |
| Mechanical robustness | Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 |
| Protective treatment / pollution degree | TC conforming to IEC 60068 TC conforming to DIN 50016 |
| Flame retardance | V1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102 |
| Parameter | Value |
|---|---|
| Width | 90 mm |
| Height | 58 mm |
| Depth | 57 mm |
Rated AC-3 at 9 A up to 440 V, it handles reversing duty on small three-phase motors (pumps, conveyors, fans) where direction change is needed under load. The 24 V DC coil keeps control voltage low and safe for PLC or relay outputs.
The preassembled reversing busbar eliminates the need to build a mechanical interlock and power crossover from separate parts, saving panel space and wiring time.
Within the TeSys K family, the standard (non-reversing) contactor LP1K0901BD3 shares the same coil voltage and main contact rating but lacks the mechanical interlock and reversing busbar. For a reversing application, the LP2K0901BD3 (with 1 NO auxiliary instead of 1 NC) is the closest functional match — verify the auxiliary contact configuration against your control circuit before substituting.
The contactor carries V1 flame retardance per UL 94, IP20 per VDE 0106, and compliance with NF F 16-101/102 for railway applications. Standard Schneider Electric declarations of conformity (CE, UKCA, EAC) and material compliance (RoHS, REACH) are available through the product documentation portal.
No related articles