Skip to main content
Log in
Schneider Electric LP5K1210JW3 — Contactors

Schneider Electric LP5K1210JW3 TeSys K Reversing Contactor,

MPNLP5K1210JW3
Obsolete

Schneider Electric TeSys K reversing contactor, 3P, AC-3 <= 440 V 12 A, 1 NO, 12 V DC coil, IP20.

Schneider Electric LP5K1210JW3 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

LP5K1210JW3 — Identification
ParameterValue
Product / component typeReversing contactor
Series / rangeTeSys
ApplicationMotor control Resistive load
LP5K1210JW3 — Ratings & Performance
ParameterValue
Rated operational voltage (Ue)Power circuit: 690 V AC 50/60 Hz Signalling circuit: 10 MOhm for signalling circuit
Utilisation categoryAC-3 AC-4 AC-1
LP5K1210JW3 — Contacts & Poles
ParameterValue
Pole configuration3P
LP5K1210JW3 — Environmental
ParameterValue
IP degree of protectionIP20 conforming to VDE 0106
Operating altitude2000 m without derating
Mechanical robustnessShocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6 Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6 Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27 Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Protective treatment / pollution degreeTC conforming to IEC 60068 TC conforming to DIN 50016
Flame retardanceV1 conforming to UL 94 Requirement 2 conforming to NF F 16-101 Requirement 2 conforming to NF F 16-102
LP5K1210JW3 — Mechanical
ParameterValue
Width90 mm
Height58 mm
Depth57 mm

Product details

The LP5K1210JW3 is a TeSys K reversing contactor from Schneider Electric, configured as 3-pole (3P) with three normally-open power poles and one normally-open auxiliary contact. It is rated for AC-3 duty at 12 A up to 440 V, making it suitable for switching small three-phase motor loads in reversing applications — think conveyors, hoists, or any direction-change circuit. The coil is 12 V DC, so it integrates directly into low-voltage DC control loops common in PLC-driven panels or battery-backed safety circuits.

Integration Notes

Dimensions are 90 mm wide × 58 mm high × 57 mm deep, fitting a standard DIN-rail footprint. The IP20 finger-safe terminals accept wire sizes typical for 12 A circuits (1.5 to 4 mm², depending on ferrule). Shock and vibration ratings (15 Gn closed, 4 Gn vibration) confirm it holds in on mobile or high-vibration equipment like crane panels or pump skids.

Frequently asked questions

What are the key ratings of the LP5K1210JW3?

It is a 3-pole reversing contactor rated AC-3 at 12 A up to 440 V, with a 12 V DC coil and one normally-open auxiliary contact. It is part of the TeSys K series and carries IP20 protection.

What is the operating temperature range for the LP5K1210JW3?

The ambient air temperature for operation is -25 to 50 °C, and for storage it is -50 to 80 °C.

What compliance documentation does the LP5K1210JW3 have?

It meets UL 94 V1 flame retardance, NF F 16-101/102 for rail fire-smoke-toxicity, and IP20 per VDE 0106. It also conforms to IEC 60068 for shock and vibration, and IEC 60068 / DIN 50016 for protective treatment.

MPN
LP5K1210JW3