Coil for 9–18 A TeSys D contactors
The LX1D2N5 is the replacement coil for Schneider TeSys D contactors rated 9 through 18 A — the LC1D09 through LC1D18 frame sizes. It is a bare coil without a built-in suppressor module, so you must add an RC snubber or varistor across the terminals if the control circuit drives an electronic output. Inrush is 60 VA at cos φ 0.75; sealed hold drops to 7 VA at cos φ 0.3. The DC resistance measures 2219 Ω at 20 °C, and the closed-circuit inductance is 78 H.
Obsolete — last-time-buy window closed
Schneider has marked the LX1D2N5 as obsolete. No official successor part number has been published. For a like-for-like replacement, the only channel is independent surplus or last-time-buy stock — quantities are finite and confirmed per RFQ. If you are holding a panel with a failed LX1D2N5, verify the contactor frame size (LC1D09 through LC1D18) and the coil voltage before ordering. The coil mounts with the standard TeSys D clip; no wiring harness modification is needed if the original suppressor module is reused externally.