This coil provides the electromagnetic force to close the contactor's main poles when energized. The 24 V AC 50 Hz control circuit draws 7 W of steady-state power, which determines the transformer or control-circuit sizing in the panel. The absence of a built-in suppressor module means an external RC snubber or varistor must be added across the coil terminals if the application requires suppression of switching transients — common practice when the contactor is driven by a PLC output or proximity to sensitive electronics. The coil's 6.82 Ω DC resistance and 0.3 mH inductance set the hold-in current and thermal rise; the 60 VA inrush figure (not directly in evidence but implied by the 7 W holding power and typical AC coil behavior) ensures the contactor pulls in reliably even at the low end of the 24 V tolerance band.
Schneider LX1D2B5 TeSys Contactor Coil, 24 V AC 50 Hz, 7 W
MPNLX1D2B5
Active
Schneider LX1D2B5 Contactor & Starter Coils — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.
$42.58Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →Specifications
| Parameter | Value |
|---|---|
| Control circuit type | AC 50 Hz |
| Product or component type | Contactor coil |
| Coil voltage | 24 V AC 50 Hz |
| Control circuit voltage limits | Operational: 0.8...1.1 Uc at 50 Hz (at <131 °F (55 °C)) |
| Inrush power in | 60 VA 50 Hz cos phi 0.75 (at 68 °F (20 °C)) |
| Hold-in power consumption in | 7 VA 50 Hz cos phi 0.3 (at 68 °F (20 °C)) |
| Range | TeSys |
| Category | 22341-CONTACTOR,D,K,&F ACCESS |
| Coil technology | Without built-in suppressor module |
| Device short name | LX1D2 |
| Average resistance | 6.82 Ohm 68 °F (20 °C) |
| Inductance of closed circuit | 0.3 H |
Product details
MPN
LX1D2B5