Skip to main content
Log in
Schneider Electric LX1G4QEHEA

Schneider LX1G4QEHEA TeSys Contactor Coil, 48-130V AC/DC

MPNLX1G4QEHEA
Active

Schneider Electric TeSys LX1G4QEHEA, contactor coil, 48-130 V AC/DC, 4-pole, push-in terminals, IP20.

$433.51 – $515.00Ref. price · indicative, final on quote
Schneider Electric LX1G4QEHEA datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

LX1G4QEHEA key specifications
ParameterValue
Product or component typeContactor coil
Coil voltage48...130 V AC/DC 50/60 Hz
Control circuit voltage limitsOperational 0.8...1.1 Uc 140 °F (60 °C)) Drop-out 0...0.45 Uc 140 °F (60 °C))
Inrush power in225 VA 120 V AC, 60 Hz
Hold-in power consumption in7.1 VA 120 V AC, 60 Hz
Poles description4P
IP degree of protectionIP20 IEC 60529
Connections - terminalsControl circuit push-in termination 1 0.0003...0.004 in² (0.2...2.5 mm²) solid stranded without cable end sleeve AWG 26...AWG 12 Control circuit push-in termination 1 0.0004...0.004 in² (0.25...2.5 mm²) flexible with cable end sleeve AWG 24...AWG 14 Control circuit push-in termination 2 0.0008...0.002 in² (0.5...1.0 mm²) rigid or stranded with cable end sleeve AWG 20...AWG 18
Pollution degree3 IEC 60947-1
Operating altitude9842.52 ft (3000 m) without derating 5000 m with derating factor
Depth3.7 in (94.0 mm)
Width5.5 in (140.7 mm)

All specifications

LX1G4QEHEA additional specifications
ParameterValue
Height5.7 in (144.5 mm)
Mechanical durability5 Mcycles
StandardsEN/IEC 60947-4-1 UL 60947-4-1A CSA C22.2 No 60947-4-1
RangeTeSys
CategoryUS10I1222328
Operating time20...35 ms opening 40...55 ms closing
Coil technologyBuilt-in bidirectional peak limiting
Quantity per set1
Device short nameLX1G
Maximum operating rate600 cyc/mn 140 °F (60 °C)
Electromagnetic compatibilityEMC immunity conforming to IEC 60947-4-1 Emission tests criteria A conforming to IEC 60947-4-1 Immunity to radiated radio-electrical interference - test level: 20 V/m conforming to EN/IEC 61000-4-3 Voltage dips and interruptions immunity test conforming to SEMI F47
Ambient air temperature for storage-76...176 °F (-60...80 °C)
Ambient air temperature for operation-13...140 °F (-25...60 °C)
Permissible ambient air temperature around the device-40...158 °F (-40...70 °C) at Uc

Product details

The Schneider Electric LX1G4QEHEA is a TeSys contactor coil rated for 48 to 130 V AC/DC control circuits, fully compliant with EN/IEC 60947-4-1 and UL 60947-4-1A as evidenced by the datasheet. It is a 4-pole coil designed for use with TeSys contactors, featuring built-in bidirectional peak limiting coil technology that suppresses inrush transients. The push-in terminals accept 0.2–2.5 mm² solid/stranded wire (AWG 26–12) without ferrules, consistent with typical panel wiring practice.

Sourcing and Documentation

This item is quoted to order. The compliance documentation per the specification includes the standards listed above; no separate RoHS or REACH certificate appears in the record, though the product falls under the RoHS-compliant TeSys family as a general note. For audit purposes, the datasheet provides the full declaration of conformance referenced to EN/IEC 60947-4-1.

Frequently asked questions

What is LX1G4QEHEA's listed depth?

The depth is 3.7 in (94.0 mm) as specified in the product dimensions.

What range does LX1G4QEHEA belong to?

It is part of the TeSys range, specifically the LX1G series of contactor coils.

What compliance documentation is available for LX1G4QEHEA?

The coil is certified to EN/IEC 60947-4-1, UL 60947-4-1A, and CSA C22.2 No 60947-4-1. These standards are declared in the datasheet.

MPN
LX1G4QEHEA