Skip to main content
Log in
Schneider Electric LX4FJ110

Schneider LX4FJ110 TeSys F contactor coil, 110 V DC, 6 W (discontinued)

MPNLX4FJ110
Active

Schneider Electric TeSys F LX4FJ110 contactor coil, 110 V DC, 6 W DC low consumption, for LC1F400 contactor, without built-in suppressor module, discontinued.

$344.40 – $526.63Ref. price · indicative, final on quote
Schneider Electric LX4FJ110 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

LX4FJ110 specifications
ParameterValue
Control circuit typeDC low consumption
Product or component typeContactor coil
Coil voltage110 V DC
Control circuit voltage limitsDrop-out 0.2...0.35 Uc 131 °F (55 °C)) Operational 0.85...1.1 Uc 131 °F (55 °C))
Inrush power in1000 W 68 °F (20 °C))
Hold-in power consumption in6 W 68 °F (20 °C)
Mechanical durability10 Mcycles
RangeTeSys
CategoryUS10I1222341
Operating time45...60 ms opening 50...60 ms closing
Coil technologyWithout built-in suppressor module
Device short nameLX4FJ
Average resistance12.7 Ohm inrush 68 °F (20 °C) 2660 Ohm holding 68 °F (20 °C)
Maximum operating rate2400 cyc/h 131 °F (55 °C)
Inductance of closed circuit270 H
Ambient air temperature for operation23...131 °F (-5...55 °C)

Product details

Overview

The LX4FJ110 is a Schneider TeSys F contactor coil rated 110 V DC, drawing 6 W in steady-state DC low-consumption mode, designed to drop into the LC1F400 contactor frame. It ships without a built-in suppressor module and carries a mechanical life of 10 Mcycles at up to 2400 cycles per hour at 55 °C.

Compared to the LX1FJ048, which is an AC 40...400 Hz coil rated 48 V and 15 VA, the LX4FJ110 runs on 110 V DC and draws only 6 W — a straight DC control circuit swap without rewiring the panel is not possible because the coil voltage and control-circuit type differ.

MPN
LX4FJ110