Overview
The LX9FG048 is a Schneider TeSys F specific contactor coil, order code LX9FG048, rated for 48 V AC 40...400 Hz low consumption control circuits. It delivers 950 W of coil power with a steady-state consumption of 8.9 W, and is designed for use with LC1F185 and LC1F225 contactors in the TeSys F range.
This coil operates without a built-in suppressor module, so an external suppression device (such as the LA4FDE) must be added across the coil terminals when driving inductive loads or when the control circuit includes a PLC output. The AC 40...400 Hz low-consumption design draws 8.9 W in the sealed state, dissipating 8...9.8 W of heat — a figure that matters for thermal management inside a closed panel. Operating time is 130 ms, and the maximum operating rate reaches 2400 cycles per hour at 131 °F (55 °C).
Applications
TeSys F contactor coils are the replaceable actuation component for Schneider's heavy-duty LC1F contactor line, used in motor starting, power switching, and reversing applications.
Schneider has classified the LX9FG048 as discontinued. No official successor part number is listed in the current documentation. For a buyer maintaining an existing TeSys F panel, the sourcing path is through surplus or broker channels — an RFQ is the fastest way to confirm availability and lead time. When evaluating a replacement, the LX1FJ048 (48 V AC, 1075 W, 15 W consumption) is a same-series coil that fits the same contactor family but draws higher sealed power; verify panel thermal capacity and control circuit loading before substituting.