Overview
The LXM05CD10M2 is a Schneider Lexium 05 LXM05C motion servo drive, order code LXM05CD10M2, rated at 750 W output power with a continuous current rating of 4 A. It operates on a 200-240 V single-phase supply and includes an integrated EMC filter for conducted emissions compliance. This drive is part of the Lexium 05 family and is now officially discontinued by Schneider, with a discontinuation date of 2025-10-29.
As a motion servo drive, the LXM05CD10M2 controls the position, speed, and torque of a connected servo motor using closed-loop feedback. The 750 W power rating defines the mechanical output it can deliver to the motor shaft, while the 4 A continuous output current sets the limit for the motor winding current under sustained load. The drive accepts a single-phase 200-240 V AC input and includes an internal EMC filter to reduce conducted emissions back onto the line — a requirement for CE-marked machinery. It provides 6 logic discrete inputs for limit switches, homing sensors, or PLC interlocks, plus 1 analog input for speed or torque reference from an external potentiometer or 0-10 V signal. Communication is via Modbus over an RS-485 link, with no polarization impedances on the bus — the drive relies on the master or an external terminator for proper line biasing. The maximum prospective line short-circuit current is 1 kA, which informs the upstream protective device selection.
Applications
Lexium 05 servo drives are used in packaging, labeling, material handling, and general automation machinery where precise motion control of a servo motor is needed — indexing, cut-to-length, pick-and-place, and winding applications. The 750 W rating suits small to medium axis loads such as conveyor belts, rotary tables, and linear actuators.