Schneider LXM28EU02M1X — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Type of cable | Shielded motor cable (temperature: 0...55 °C) copper |
| Connector type | RJ45 (CN4) for EtherCAT |
| Protection type | Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor |
| Type of cooling | Natural convection |
| Range of product | Lexium 28 |
| Control signal type | Servo motor encoder feedback CN2 |
| Product or component type | Motion servo drive |
| Output voltage | <= power supply voltage |
| Supply voltage limits | 108...132 V single phase |
| Discrete input voltage | 24 V DC for logic |
| Discrete output voltage | 12...24 V DC |
| Supply voltage | 110 V (- 2...20 %) for single phase |
| Parameter | Value |
|---|---|
| Supply voltage description | Single phase 110 V AC 50...60 Hz |
| Drive voltage drop coefficient | 1 |
| Line current | 3.6 A 226.8 % at 110 V, single phase |
| Output current 3s peak | 4.5 A at 110 V |
| Maximum leakage current | 0.9 mA |
| Continuous output current | 1.5 A at 16 kHz |
| Continuous output current 2 | 1.5 A |
| Continuous output current 3 | 1.5 A |
| Nominal power | 0.2 kW at 110 V 16 kHz |
| Continuous power | 200 W at 110 V |
| Supply frequency | 50/60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| Switching frequency | 16 kHz |
| Switching frequency 2 | 16 kHz |
| Switching frequency 3 | 16 kHz |
| Network number of phases | 1 |
| IP degree of protection | IP20 |
| Physical interface | RS485 for Modbus Serial line slave |
| Communication interface | EtherCAT, integrated |
| Communication iinterface | EtherCAT Pulse train output |
| Electrical connection | Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S) |
| EMC filter | Without EMC filter |
| Shock resistance | 10 gn, type I conforming to IEC 60721-3-3 |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | <= 1000 m without derating |
| Vibration resistance | 3M4 amplitude = 3 mm (f = 9...200 Hz) conforming to IEC 60721-3-3 |
| EMC filter compatibility | Type 020 Type 022 |
| Depth | 170 mm |
| Width | 55 mm |
| Height | 150 mm |
| Standards | IEC 61800-5-1 |
| Marking | CSA CULus CE |
| Status LED | 1 LED (red) DC bus energized 1 LED (multi-colour) N.RUN 1 LED (multi-colour) N.ERR 2 LEDs (yellow) Link (Link Status) 2 LEDs (yellow) activity |
| Safety level | SIL 2 conforming to IEC 61800-5-2: 2007 SIL 2 conforming to IEC 61508-1: 2010 PL d/category 3 conforming to ISO 13849-1: 2008 SIL 2 conforming to ISO 13849-1: 2009/AC SIL 2 conforming to IEC 60204-1: 2006 SIL 2 conforming to IEC 60204-1: 2009/A1 SIL 2 conforming to IEC 60204-1: 2010/AC SIL 2 conforming to IEC 62061: 2012 |
| Field weakening | False |
| Safety function | STO (safe torque off), integrated |
| Method of access | Slave |
| Device short name | LXM28E |
| Transmission rate | 100 Mbit/s for EtherCAT |
| Operating position | Vertical |
| Format of the drive | Compact housing |
| Signalling function | Servo status and fault codes five 7-segment display units |
| Discrete input logic | Positive or negative (CN1) |
| Electrical isolation | Between power and control |
| Overvoltage category | III |
| Discrete input number | 8 programmable (CN1) 2 fast capture (CN1) 1 safety function STO (CN9) |
| Discrete output logic | Positive or negative (CN1) |
| Discrete output number | 1 pulse train output (PTO) (CN1) 4 logic output (CN1) at 12...24 V DC |
| Electromagnetic compatibility | Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3 |
| Ambient air temperature for storage | -25...65 °C |
| Ambient air temperature for operation | 0...55 °C |
The LXM28EU02M1X is a Schneider Lexium 28 single-axis AC servo drive rated 200 W at 110 V, delivering 1.5 A continuous at 16 kHz switching frequency. It carries integrated EtherCAT on an RJ45 port and includes STO as a standard safety function, compliant to SIL 2 / PL d. The drive is convection-cooled, IP20, and measures 55 x 150 x 170 mm. It ships without an internal EMC filter, so an external filter is required for conducted emissions compliance in most installations.
No related articles