Skip to main content
Log in
Schneider Electric LXM28EU07M1X

Schneider LXM28EU07M1X Lexium 28 servo drive, 750 W, EtherCAT

MPNLXM28EU07M1X
Obsolete

Schneider Electric Lexium 28 LXM28EU07M1X AC servo drive, 750 W at 110 V, 4.5 A at 16 kHz, integrated EtherCAT, STO safety function, IP20, 55 x 150 x 170 mm, without EMC filter.

$1,110.00Ref. price · indicative, final on quote
Schneider Electric LXM28EU07M1X datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

LXM28EU07M1X key specifications
ParameterValue
Type of cableShielded motor cable (temperature: 0...55 °C) copper
Connector typeRJ45 (CN4) for EtherCAT
Protection typeAgainst reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor
Type of coolingNatural convection
Range of productLexium 28
Control signal typeServo motor encoder feedback CN2
Product or component typeMotion servo drive
Output voltage<= power supply voltage
Supply voltage limits108...132 V single phase
Discrete input voltage24 V DC for logic
Discrete output voltage12...24 V DC
Supply voltage110 V (- 2...20 %) for single phase

All specifications

LXM28EU07M1X additional specifications
ParameterValue
Supply voltage descriptionSingle phase 110 V AC 50...60 Hz
Drive voltage drop coefficient1
Line current9 A 181.8 % at 110 V, single phase
Output current 3s peak13.5 A at 110 V
Maximum leakage current0.9 mA
Continuous output current4.5 A at 16 kHz
Continuous output current 24.5 A
Continuous output current 34.5 A
Nominal power0.75 kW at 110 V 16 kHz
Continuous power750 W at 110 V
Supply frequency50/60 Hz - 5...5 %
Network frequency47.5...63 Hz
Switching frequency16 kHz
Switching frequency 216 kHz
Switching frequency 316 kHz
Network number of phases1
IP degree of protectionIP20
Physical interfaceRS485 for Modbus Serial line slave
Communication interfaceEtherCAT, integrated
Communication iinterfaceEtherCAT Pulse train output
Electrical connectionSpring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S)
EMC filterWithout EMC filter
Shock resistance10 gn, type I conforming to IEC 60721-3-3
Relative humidity5...95 % without condensation
Operating altitude<= 1000 m without derating
Vibration resistance3M4 amplitude = 3 mm (f = 9...200 Hz) conforming to IEC 60721-3-3
EMC filter compatibilityType 020 Type 022
Depth170 mm
Width55 mm
Height150 mm
StandardsIEC 61800-5-1
MarkingCE CSA CULus
Status LED1 LED (red) DC bus energized 1 LED (multi-colour) N.RUN 1 LED (multi-colour) N.ERR 2 LEDs (yellow) Link (Link Status) 2 LEDs (yellow) activity
Safety levelSIL 2 conforming to IEC 61800-5-2: 2007 SIL 2 conforming to IEC 61508-1: 2010 PL d/category 3 conforming to ISO 13849-1: 2008 SIL 2 conforming to ISO 13849-1: 2009/AC SIL 2 conforming to IEC 60204-1: 2006 SIL 2 conforming to IEC 60204-1: 2009/A1 SIL 2 conforming to IEC 60204-1: 2010/AC SIL 2 conforming to IEC 62061: 2012
Field weakeningFalse
Safety functionSTO (safe torque off), integrated
Method of accessSlave
Device short nameLXM28E
Transmission rate100 Mbit/s for EtherCAT
Operating positionVertical
Format of the driveCompact housing
Signalling functionServo status and fault codes five 7-segment display units
Discrete input logicPositive or negative (CN1)
Electrical isolationBetween power and control
Overvoltage categoryIII
Discrete input number8 programmable (CN1) 2 fast capture (CN1) 1 safety function STO (CN9)
Discrete output logicPositive or negative (CN1)
Discrete output number1 pulse train output (PTO) (CN1) 4 logic output (CN1) at 12...24 V DC
Electromagnetic compatibilityConducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Ambient air temperature for storage-25...65 °C
Ambient air temperature for operation0...55 °C

Product details

Overview

The LXM28EU07M1X is a Schneider Lexium 28 single-axis AC servo drive rated 750 W at 110 V supply, delivering 4.5 A continuous output at a 16 kHz switching frequency. It integrates EtherCAT at 100 Mbit/s via RJ45 and includes STO (safe torque off) as a standard safety function, rated SIL 2 / PL d. The drive carries CE, CSA, and cULus markings, is IP20 rated, and measures 55 mm wide by 150 mm high by 170 mm deep. It ships without an internal EMC filter, so an external filter may be required for conducted emissions compliance depending on the installation.

MPN
LXM28EU07M1X