Skip to main content
Log in
Schneider Electric MGN19803 — Miniature Circuit Breakers (MCB)

MGN19803 Acti9 OF/SD auxiliary contact, 6A, 230-400V AC

MPNMGN19803
Obsolete

Schneider Electric Acti9 OF/SD auxiliary contact, MGN19803, 1 C/O fault contact, 6 A rated, 230...400 V AC 50/60 Hz control, 9 mm wide, clip-on DIN rail mount.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

MGN19803 — Identification
ParameterValue
Product range (series)Acti9
Product/component typeDouble OC or fault contact
MGN19803 — Ratings
ParameterValue
Rated current (In)6 A at 24 V, DC 2 A at 60 V, DC 1.5 A at 110 V, DC 1 A at 250 V, DC 6 A at 230 V, AC 50 Hz 3 A at 400 V, AC 50 Hz
MGN19803 — Mechanical
ParameterValue
Mounting supportDIN rail
Mounting modeClip-on
Terminal connection typeScrew clamp terminal (bottom) 1 cable(s) 0.25...4 mm² - rigid Screw clamp terminal (bottom) 1 cable(s) 0.25...2.5 mm² - flexible Screw clamp terminal (bottom) 2 cable(s) 1.5 mm² - rigid Screw clamp terminal (bottom) 1 cable(s) 2.5 mm² - flexible with ferrule
Terminal tightening torque0.6 N.m bottom
Wire stripping length6 mm for bottom connection
Width9 mm
Height85 mm
Depth76 mm
Number of 9 mm pitches1
MGN19803 — Environmental
ParameterValue
Operating ambient temperature-25...60 °C
MGN19803 — Approvals
ParameterValue
StandardsEN/IEC 60947-5-1
MGN19803 — Other specifications
ParameterValue
ColorGrey
Device short nameOF and SD
Signal contacts composition1 C/O
Coil voltage230...400 V AC 50/60 Hz 24...250 V DC

Product details

The Schneider Electric MGN19803 is an Acti9-series auxiliary contact block — a double OC (open contact) or fault contact that signals the status of a companion circuit breaker or switch. It carries one C/O signal contact and is rated for 6 A at 230 V AC, 50 Hz, with a DC rating table that drops from 6 A at 24 V to 1 A at 250 V DC. The control circuit accepts 230...400 V AC 50/60 Hz or 24...250 V DC, so it works across both mains-voltage and low-voltage control schemes.

Snap-on DIN rail mount, 9 mm wide — one pitch on the rail, so it tucks into a crowded panel without eating up extra space. The bottom screw-clamp terminals accept 0.25...4 mm² rigid or 0.25...2.5 mm² flexible wire; tighten to 0.6 N·m. Strip 6 mm for the connection.

Lifecycle reality

This part is marked obsolete by Schneider Electric.

Frequently asked questions

What are the key ratings for MGN19803?

Rated 6 A at 230 V AC 50 Hz, with DC ratings from 6 A at 24 V down to 1 A at 250 V DC. Control circuit voltage is 230...400 V AC or 24...250 V DC. Complies with EN/IEC 60947-5-1 for control circuit devices.

Where can I buy MGN19803 and what is the price?

Sourced to order against an RFQ through independent distribution. Current pricing and availability are confirmed at quote time — submit an RFQ for a firm quote.

What is the width and depth of MGN19803?

Width is 9 mm (one DIN-rail pitch), depth is 76 mm, height is 85 mm. Colour is grey.

MPN
MGN19803