Skip to main content
Log in
Schneider Electric MGN25142 — Miniature Circuit Breakers (MCB)

MGN25142 C60H MCB, 4P, D Curve, 6 A, 30 kA

MPNMGN25142
Obsolete

Schneider Electric C60H Multi9 miniature circuit breaker, 4P, D curve, 6 A, 30 kA at 240 V AC, EN/IEC 60947-2.

Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

MGN25142 — Identification
ParameterValue
Product nameC60
Product rangeMulti9
Product range (series)C60
Product/component typeMiniature circuit-breaker
Device applicationDistribution
MGN25142 — Ratings
ParameterValue
Rated current (In)6 A at 50 °C conforming to EN/IEC 60947-2
Poles configuration4P
Number of protected poles4
Breaking capacity30 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 15 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity (Ics)15 kA 50 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
Rated operational voltage (Ue)440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase
Network type (AC/DC)AC
Network frequency50/60 Hz
Utilisation categoryCategory A conforming to EN/IEC 60947-2
MGN25142 — Protection
ParameterValue
Curve codeD
Trip unit technologyThermal-magnetic
Magnetic tripping limit12 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)10000 cycles conforming to EN/IEC 60947-2
Mechanical durability (cycles)20000 cycles
MGN25142 — Mechanical
ParameterValue
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Control typeToggle
Terminal connection typeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Terminal tightening torquePower circuit: 2 N.m
Wire stripping lengthPower circuit: 14 mm
Contact position indicatorYes
Local signalling/indicationON/OFF indication
Width72 mm
Height81 mm
Depth73 mm
Number of 9 mm pitches8
MGN25142 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
Pollution degree3 conforming to EN/IEC 60947-2
MGN25142 — Approvals
ParameterValue
StandardsEN/IEC 60947-2

Product details

The MGN25142 is a C60H miniature circuit breaker from the Multi9 range, rated 6 A at 50 °C on a 4-pole, D-curve thermal-magnetic trip. It breaks up to 30 kA Icu at 240 V AC phase-to-phase per EN/IEC 60947-2, and 15 kA at 415 V AC. That D-curve magnetic trip at 12 x In (±20%) means it handles motor inrush and transformer energization without nuisance tripping — the right choice for inductive loads on a distribution board.

Occupies 8 modules of 9 mm pitch — 72 mm wide total. Depth is 73 mm, height 81 mm. IP20 finger-safe front.

Frequently asked questions

Where can I buy MGN25142 and how do I get a price?

The MGN25142 is sourced and quoted to order against an RFQ through independent distribution. Submit an RFQ for current availability and pricing.

What is the closest alternative to MGN25142 in this component family?

Within the C60 range, the closest sibling is the C60N (lower breaking capacity — typically 10 kA at 415 V vs. the C60H's 15 kA). The C60H is the higher-fault-rated variant; if your fault level is lower, the C60N may be a cost-effective alternative, but verify the required Icu at your voltage.

What is MGN25142's listed depth?

The MGN25142 has a depth of 73 mm.

What is MGN25142's listed range?

The MGN25142 belongs to the Multi9 range, specifically the C60 product family.

What compliance documentation does this brand provide for MGN25142?

The MGN25142 is certified to EN/IEC 60947-2. The manufacturer typically provides RoHS and REACH declarations upon request; check with your sourcing contact for specific documentation.

MPN
MGN25142