Skip to main content
Log in
Schneider Electric MGN60656 — Miniature Circuit Breakers (MCB)

MGN60656 C60H MCB 32A 4P C-Curve DC, 50 kA at 250 V DC

MPNMGN60656
Obsolete

Schneider Electric C60H Multi9 series, MGN60656 miniature circuit breaker, 4-pole, 32 A, C-curve, 50 kA Icu at 250 V DC, EN/IEC 60947-2.

Schneider Electric MGN60656 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

MGN60656 — Identification
ParameterValue
Product nameC60
Product rangeMulti9
Product range (series)C60
Product/component typeMiniature circuit-breaker
Device applicationDistribution
MGN60656 — Ratings
ParameterValue
Rated current (In)32 A at 50 °C conforming to EN/IEC 60947-2
Poles configuration4P
Number of protected poles4
Breaking capacity30 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 15 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 50 kA Icu at 250 V DC phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity (Ics)15 kA 50 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 50 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz 50 kA 100 % conforming to EN/IEC 60947-2 - 250 V DC
Rated operational voltage (Ue)440 V AC 50/60 Hz 250 V DC 240 V AC 50/60 Hz phase to phase 415 V AC 50/60 Hz phase to phase
Network type (AC/DC)DC
Utilisation categoryCategory A conforming to EN/IEC 60947-2
MGN60656 — Protection
ParameterValue
Curve codeC
Trip unit technologyThermal-magnetic
Magnetic tripping limit8.5 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)10000 cycles conforming to EN/IEC 60947-2
Mechanical durability (cycles)20000 cycles
MGN60656 — Mechanical
ParameterValue
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Control typeToggle
Terminal connection typeTunnel type terminals1.5...35 mm² flexible without cable end Tunnel type terminals1.5...35 mm² flexible with cable end Tunnel type terminals1.5...35 mm² rigid
Terminal tightening torquePower circuit: 3.5 N.m
Wire stripping lengthPower circuit: 14 mm
Contact position indicatorYes
Local signalling/indicationON/OFF indication
Width72 mm
Height81 mm
Depth73 mm
Number of 9 mm pitches8
MGN60656 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
Pollution degree3 conforming to EN/IEC 60947-2
MGN60656 — Approvals
ParameterValue
StandardsEN/IEC 60947-2

Product details

DC-rated breaking capacity for panel protection

The MGN60656 is a C60H miniature circuit breaker from the Multi9 range, rated 32 A at 50 °C with a C-curve trip characteristic. Rated operational voltage covers 240/415/440 V AC phase-to-phase and 250 V DC, so it fits both AC distribution boards and DC switchgear. The 4-pole configuration with thermal-magnetic trip unit gives overcurrent and short-circuit protection on all four poles, with magnetic tripping at 8.5 x In ±20 %.

Snaps onto 35 mm symmetrical DIN rail, fixed mounting mode. Occupies 8 x 9 mm pitches (72 mm wide), 81 mm tall, 73 mm deep — standard Multi9 footprint that fits existing distribution boards without re-spacing. IP20 finger-safe terminals; tunnel-type terminals accept 1.5 to 35 mm² rigid or flexible conductors. Toggle switch with ON/OFF indication and contact position indicator. Compatible with comb busbars and distribution blocks on top or bottom.

Pollution degree 3, utilisation category A, suitable for isolation. Electrical durability rated 10,000 cycles; mechanical durability 20,000 cycles.

Frequently asked questions

What is the breaking capacity of MGN60656 at 250 V DC?

50 kA Icu at 250 V DC phase-to-phase conforming to EN/IEC 60947-2. At 240 V AC it is 30 kA Icu, at 415 V AC 15 kA Icu, and at 440 V AC 10 kA Icu.

Where can I buy MGN60656?

Sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time.

What is the rated current of MGN60656?

32 A at 50 °C conforming to EN/IEC 60947-2.

What is the depth of MGN60656?

73 mm.

What standards does MGN60656 comply with?

EN/IEC 60947-2 for low-voltage switchgear and controlgear, pollution degree 3, suitable for isolation.

MPN
MGN60656