Skip to main content
Log in
Schneider Electric MGN60894

Schneider Electric MGN60894 C60N MCB, 16 A, C Curve, 3P, 20

MPNMGN60894
Obsolete

Schneider Electric C60N Multi9 miniature circuit breaker, MGN60894, 16 A rated current, C curve, 3 poles, 20 kA breaking capacity at 240 V AC, EN/IEC 60947-2.

Schneider Electric MGN60894 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

MGN60894 key specifications
ParameterValue
Control typeToggle
Network typeDC
Range of productC60
Product or component typeMiniature circuit-breaker
[Ue] rated operational voltage440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase
Breaking capacity20 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 6 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2
Current16 A at 50 °C conforming to EN/IEC 60947-2
[Ics] rated service breaking capacity15 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 75 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 4.5 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
Poles description3P
Number of protected poles3
Utilisation categoryCategory A conforming to EN/IEC 60947-2
IP degree of protectionIP20 conforming to EN/IEC 60947-2

All specifications

MGN60894 additional specifications
ParameterValue
Mounting modeFixed
Mounting support35 mm symmetrical DIN rail
Wire stripping lengthPower circuit: 14 mm
Connections - terminalsTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Pollution degree3 conforming to EN/IEC 60947-2
Depth73 mm
Width54 mm
Height81 mm
Electrical durability10000 cycles conforming to EN/IEC 60947-2
Mechanical durability20000 cycles
StandardsEN/IEC 60947-2
RangeMulti9
Curve codeC
9 mm pitches6
Local signallingON/OFF indication
Device short nameC60N
Tightening torquePower circuit: 2 N.m
Device applicationDistribution
Trip unit technologyThermal-magnetic
Magnetic tripping limit8.5 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Contact position indicatorYes
Ambient air temperature for storage-40...80 °C
Ambient air temperature for operation-30...70 °C
Comb busbar and distribution block compatibilityTop or bottom: YES

Product details

Panel-builder commissioning notes

The Schneider Electric MGN60894 is a C60N miniature circuit breaker from the Multi9 range, rated 16 A with a C curve and 3 protected poles. The 20 kA Icu at 240 V AC phase-to-phase (EN/IEC 60947-2) gives it enough interrupting capacity for most distribution subfeeds; the service breaking capacity Ics is 15 kA (75 %) at the same voltage, meaning it can reclose after a fault at that level without immediate replacement. Thermal-magnetic trip technology with a magnetic threshold of 8.5 x In (±20 %) handles motor inrush and lighting loads cleanly.

DIN rail integration

Top or bottom feed is supported, with comb busbar and distribution block compatibility. The toggle actuator provides local ON/OFF indication. Earth-leakage protection requires a separate block — not integrated.

Frequently asked questions

Where can I buy MGN60894?

The MGN60894 is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time.

What is the breaking capacity of MGN60894?

The MGN60894 has a breaking capacity (Icu) of 20 kA at 240 V AC phase-to-phase, 10 kA at 415 V AC, and 6 kA at 440 V AC, all per EN/IEC 60947-2.

What standards does MGN60894 comply with?

The MGN60894 complies with EN/IEC 60947-2 and is suitable for isolation per that standard. Pollution degree 3 is rated.

MPN
MGN60894