Skip to main content
Log in
Schneider Electric MGN60896 — Miniature Circuit Breakers (MCB)

MGN60896 C60N MCB, 25 A, C Curve, 20 kA, 3P

MPNMGN60896
Obsolete

Schneider Electric C60N Multi9 miniature circuit breaker, 25 A, C curve, 20 kA Icu at 240 V AC, 3 poles, thermal-magnetic trip, DIN rail mount.

Schneider Electric MGN60896 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

MGN60896 — Identification
ParameterValue
Product nameC60
Product rangeMulti9
Product range (series)C60
Product/component typeMiniature circuit-breaker
Device applicationDistribution
MGN60896 — Ratings
ParameterValue
Rated current (In)25 A at 50 °C conforming to EN/IEC 60947-2
Poles configuration3P
Number of protected poles3
Breaking capacity20 kA Icu at 240 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 10 kA Icu at 415 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2 6 kA Icu at 440 V AC 50/60 Hz phase to phase conforming to EN/IEC 60947-2
Rated service breaking capacity (Ics)15 kA 75 % conforming to EN/IEC 60947-2 - 240 V AC 50/60 Hz 7.5 kA 75 % conforming to EN/IEC 60947-2 - 415 V AC 50/60 Hz 4.5 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
Rated operational voltage (Ue)440 V AC 50/60 Hz 240 V AC 50/60 Hz phase to phase
Network type (AC/DC)DC
Utilisation categoryCategory A conforming to EN/IEC 60947-2
MGN60896 — Protection
ParameterValue
Curve codeC
Trip unit technologyThermal-magnetic
Magnetic tripping limit8.5 x In +/- 20 %
Earth-leakage protectionSeparate block
Suitability for isolationYes conforming to EN/IEC 60947-2
Electrical durability (cycles)10000 cycles conforming to EN/IEC 60947-2
Mechanical durability (cycles)20000 cycles
MGN60896 — Mechanical
ParameterValue
Mounting support35 mm symmetrical DIN rail
Mounting modeFixed
Control typeToggle
Terminal connection typeTunnel type terminals1...25 mm² rigid Tunnel type terminals1...25 mm² flexible without cable end Tunnel type terminals1...25 mm² flexible with cable end
Terminal tightening torquePower circuit: 2 N.m
Wire stripping lengthPower circuit: 14 mm
Contact position indicatorYes
Local signalling/indicationON/OFF indication
Width54 mm
Height81 mm
Depth73 mm
Number of 9 mm pitches6
MGN60896 — Environmental
ParameterValue
Operating ambient temperature-30...70 °C
Storage ambient temperature-40...80 °C
IP degree of protectionIP20 conforming to EN/IEC 60947-2
Pollution degree3 conforming to EN/IEC 60947-2
MGN60896 — Approvals
ParameterValue
StandardsEN/IEC 60947-2

Product details

The MGN60896 is a C60N miniature circuit breaker from the Multi9 range, rated 25 A at 50 °C with a C curve (magnetic trip at 8.5 x In ±20 %). The 3-pole configuration protects three phases, and the thermal-magnetic trip unit handles both overload (thermal) and short-circuit (magnetic) events in a single device.

This is a distribution MCB for final subcircuit protection in commercial and industrial panels. The C curve suits moderate inrush loads — lighting banks, small motor starters, control transformers — where the magnetic trip at 8.5 x In avoids nuisance tripping on startup while still clearing hard faults. Category A (no intentional short-time delay) means it trips instantaneously on magnetic pickup; coordination with upstream devices depends on the I²t let-through. IP20 finger protection is standard for enclosed panel mounting. The toggle switch provides local ON/OFF indication, and the contact position indicator confirms the state visually.

Frequently asked questions

What is the breaking capacity of MGN60896?

The MGN60896 has a rated breaking capacity (Icu) of 20 kA at 240 V AC phase-to-phase, 10 kA at 415 V AC, and 6 kA at 440 V AC, all per EN/IEC 60947-2. The service breaking capacity (Ics) is 75 % of Icu at each voltage level.

What is the closest alternative to MGN60896 in the same family?

Within the C60N range, the closest peer is the same 25 A, C-curve, 3-pole variant with a different breaking capacity tier — the C60H (higher Icu) or C60L (lower Icu). The MGN60896 sits at the standard C60N breaking level (20 kA at 240 V). No pin-compatible drop-in exists with different ratings; the physical footprint (6 module pitches, 54 mm wide) is identical across the C60 series, so swapping between tiers is a straight DIN-rail replacement if the SCCR study allows.

How do I get pricing and availability for MGN60896?

Submit an RFQ through the storefront. The part is sourced to order via independent distribution; current pricing and lead time are confirmed at quote time against your quantity and delivery window.

MPN
MGN60896