Schneider Electric NTSDAO0205K
MPNNTSDAO0205K
Active
Discrete Output Module + Base, 2 Out, 1A, 100V to 240V AC, 1/2/3 Wires, Modicon Edge I/O NTS
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Range of product | Modicon Edge I/O NTS |
| Power supply type | Bus power from power supply bus (24 Vdc) Field power from external power supply (100...240 Vac) |
| Output protection type | RC snubber suppression per channel |
| Product or component type | Discrete output module kit |
| Maximum voltage drop | <1.55 V AC |
| Discrete output voltage | 80...264 V AC |
| Rated operational voltage limits | 85...264 V AC 47...63 Hz |
| Maximum leakage current | 2.5 mA 240 V AC 2 mA 120 V AC |
| Typical current consumption | 30 mA 24 V DC on the Bus current 0 mA 24 V DC on the internal field current |
| Power dissipation in | 2.36 W maximum at 24 V DC |
| Discrete output frequency | 47...63 Hz |
| IP degree of protection | IP20 |
All specifications
| Parameter | Value |
|---|---|
| Mounting support | Top hat type TH35-7.5 rail IEC 60715 Top hat type TH35-15 rail IEC 60715 |
| Electrical connection | Screw/spring terminal block |
| Response time on output | 0.5 ms turn-on 0.5 ms turn-off |
| Pollution degree | 2 |
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) without derating 2000...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 3.1 in (80 mm) |
| Width | 0.6 in (15 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Product weight | 0.161 lb(US) (0.073 kg) |
| Standards | EN/IEC 61131-2 EN 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive 2014/35/EU |
| Operating mode | Asynchronous |
| Kit composition | NTSDAO0205 module NTSXBA0100H base |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED per channel (green) for channel diagnostic 1 LED (red) for module error (ERR) |
| Output diagnostic | External power supply error per channel |
| Device application | Industrial Application |
| Output wiring mode | 1, 2 or 3 wires |
| Mandatory accessory | NTSXTB12_1_H terminal block |
| Hot swapping fallback | Yes |
| Discrete output number | 2 triac |
| Paralleling of outputs | Yes for logic links Yes for redundant control of load |
| Group of output channels | 1 group |
| Environmental characteristic | Gas resistant C3 and G2 |
| Isolation between channels and bus | 3000 V AC |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) |
| Isolation between channels and ground | 3000 V AC |
MPN
NTSDAO0205K