Schneider Electric NTSDAI0804K
MPNNTSDAI0804K
Active
Discrete Input Module + Base, 8 In, 100V to 120V AC, Sink, 1 Wire, Modicon Edge I/O NTS
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Range of product | Modicon Edge I/O NTS |
| Product or component type | Discrete input module kit |
| Discrete input voltage | 100...120 V AC |
| Voltage state 0 guaranteed | = 2 mA |
| Voltage state 1 guaranteed | >= 79 V |
| Discrete input current | 6.5 mA at 120 V AC 50 Hz |
| Current state 0 guaranteed | <= 2 mA |
| Typical current consumption | 32.4 mA 24 V DC on the Bus current 0 mA 24 V DC on the internal field current |
| Power dissipation in | 1.33 W maximum at 24 V DC |
| Discrete input frequency | 47...63 Hz |
| IP degree of protection | IP20 |
| Mounting support | Top hat type TH35-7.5 rail IEC 60715 Top hat type TH35-15 rail IEC 60715 |
All specifications
| Parameter | Value |
|---|---|
| Electrical connection | Screw/spring terminal block |
| Response time on input | 5.8 ms (on to off) |
| Pollution degree | 2 |
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) without derating 2000...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 3.1 in (80 mm) |
| Width | 0.6 in (15 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Product weight | 0.161 lb(US) (0.073 kg) |
| Standards | EN/IEC 61131-2 EN 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive 2014/35/EU |
| Operating mode | Asynchronous |
| Input filtering | 5.8...20 ms configurable in 0.1 ms step |
| Kit composition | NTSDAI0804 module NTSXBA0100H base |
| Input diagnostic | External power supply error per channel Broken wire error per channel |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED per channel (green) for channel diagnostic 1 LED (red) for module error (ERR) |
| Input wiring mode | 1 wire |
| Device application | Industrial Application |
| Mandatory accessory | NTSXTB12_1_H terminal block |
| Discrete input number | 8 |
| Hot swapping fallback | Yes |
| Group of input channels | 1 group |
| Discrete input compatibility | 8 type 1 conforming to IEC 61131-2 |
| Environmental characteristic | Gas resistant C3 and G2 |
| Isolation between channels and bus | 3000 V AC |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) |
| Isolation between channels and ground | 3000 V AC |
MPN
NTSDAI0804K