Schneider Electric NTSEME0102K
MPNNTSEME0102K
Active
Encoder Input Module + Base, 1 SinCos 400kHz, Hiperface 400kHz or EnDat 1MHz, 2 In, Modicon Edge I/O NTS
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Range of product | Modicon Edge I/O NTS |
| Power supply type | Field power from external power supply (24 Vdc) |
| Input protection type | Over voltage protection Reverse polarity protection |
| Product or component type | Encoder input module |
| Isolation voltage | 850 V AC between input and output between input and ground |
| Discrete input voltage | 24 V DC |
| Voltage state 1 guaranteed | > 11 V DC |
| Rated operational voltage limits | 20.4...28.8 V DC |
| Current state 1 guaranteed | > 2 mA |
| Typical current consumption | 30.7 mA on the Bus current 131.5 mA on the field current |
| Power dissipation in | 1.6 W |
| IP degree of protection | IP20 |
All specifications
| Parameter | Value |
|---|---|
| Mounting support | base |
| Maximum cable distance between devices | Shielded cable <65.6 ft (20 m) |
| Pollution degree | 2 |
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) without derating 2000 m...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 2.7 in (69 mm) |
| Width | 0.6 in (15 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Product weight | 0.106 lb(US) (0.048 kg) |
| Standards | EN/IEC 61131-2 EN 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive 2014/35/EU |
| Operating mode | Synchronous |
| Input filtering | 0...20 ms configurable by software |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED per channel (green) for I/O LED status 1 LED (red) for module error (ERR) |
| Input wiring mode | 2-wire |
| Device application | Industrial Application |
| Mandatory accessory | NTSXBA0100H base NTSXTB18_0_H terminal block |
| Discrete input logic | Sink |
| Protective treatment | Standard version |
| Discrete input number | 2 type 3 conforming to IEC 61131-2 |
| Hot swapping fallback | Yes |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) |
MPN
NTSEME0102K