Schneider Electric RM17JA12M7
MPNRM17JA12M7
Active
Current control relay, Harmony Control Relays, 5A, 1CO, overcurrent and undercurrent, 0.5...10A, 220 to 240V AC
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026
Specifications
| Parameter | Value |
|---|---|
| Type | Current control relay |
| Control type | Without test button |
| Time delay type | Adjustable 0.1...30 s, +/- 10 % of the full scale value Tt- time delay upon fault |
| Range of product | Harmony Control Relays |
| Product or component type | Current control relay |
| Contacts type and composition | 1 C/O |
| Supply voltage limits | 198...264 V AC |
| Dielectric test voltage | 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1 |
| Maximum switching voltage | 250 V AC |
| Supply voltage | 220...240 V AC/DC 50/60 Hz, self-powered |
| Operating voltage tolerance | - 10 % + 10 % Un |
| Voltage | 250 V conforming to IEC 60664-1 |
All specifications
| Parameter | Value |
|---|---|
| Nominal output current | 5 A |
| Maximum switching current | 5 A AC/DC |
| Minimum switching current | 10 mA at 12 V AC |
| Maximum power consumption in | 1.5 W AC |
| Control circuit frequency | 50...60 Hz +/- 5 % |
| Utilisation category | AC-15 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 DC-1 conforming to IEC 60947-4-1 AC-1 conforming to IEC 60947-4-1 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529 IP30 (housing) conforming to IEC 60529 IP50 (front panel) conforming to IEC 60529 |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 3.3 mm² (AWG 20...AWG 12) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.5...1 x 2.5 mm² (AWG 20...AWG 14) flexible with cable end Screw terminals, 2 x 0.5...2 x 1.5 mm² (AWG 20...AWG 16) flexible with cable end |
| Resistance across terminals | 0.005 Ohm at L - Li |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| Relative humidity | 93...97 % at 25...55 °C conforming to IEC 60068-2-30 |
| Vibration resistance | 0.35 mm (f= 5...57.6 Hz) conforming to IEC 60068-2-6 1 gn (f= 57.6...150 Hz) conforming to IEC 60255-21-1 |
| Non-dissipating shock wave | 4 kV conforming to IEC 60255-5 4 kV conforming to IEC 60664-1 4 kV conforming to IEC 61000-4-5 |
| Depth | 72 mm |
| Width | 17.5 mm |
| Height | 90 mm |
| Product weight | 0.07 kg |
| Housing material | Polycarbonate |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Standards | EN/IEC 60255-1 UL 508 |
| Insulation | Between supply and measurement |
| Relay name | RM17JA |
| Reset time | 1500 ms time delay |
| Operating rate | <= 360 operations/hour full load |
| Output contacts | 1 C/O |
| Local signalling | LED (green) for power ON LED (yellow) for relay ON |
| Measurement range | 0.5...10 A current AC 50/60 Hz |
| Tightening torque | 5.3...8.8 lb.in 0.6...1 N.m |
| Operating position | Any position without derating |
| Immunity to microbreaks | 50 ms |
| Maximum measuring cycle | 100 ms measurement cycle as true rms value |
| Switching capacity in | 1250 VA |
| Switching threshold drift | 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| Relay monitored parameters | Overcurrent or undercurrent in window mode Overcurrent or undercurrent detection |
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4 Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Ambient air temperature for storage | -40...70 °C |
| Ambient air temperature for operation | -20...60 °C |
| Setting accuracy of the switching threshold | +/- 10 % of the full scale |
MPN
RM17JA12M7