The 3PDT (three-pole double-throw) contact form switches three independent circuits simultaneously, each rated at 10 A. The 230 VAC coil draws 6800 ohms and operates with a typical pick-up and drop-out time of 20 ms. The relay is rated for up to 1200 cycles per hour under load, making it suitable for moderate-speed switching applications in control panels and machinery.
Compliance & environmental
The RUMF32P7 meets UL 508 and IEC 61810-1 standards. Dielectric strength is 1500 V AC between contacts (micro disconnection), 2500 V AC between coil and contact (reinforced), and 2000 V AC between poles (basic). Pollution degree 3 is specified for industrial environments. Rated insulation voltage is 250 V, with a 4000 V impulse withstand.
A lockable push-to-test button allows manual actuation for commissioning and troubleshooting. Status indication is provided by both an LED and a mechanical flag, giving clear visual confirmation of the relay state even when the panel is not powered.
The relay is supplied as a complete product (PCE package) and mounts to a socket via tab terminals. The enclosed sealing type (RT I) protects contacts from dust and light splashes. Operating position is any, and the relay is rated for Level A group mounting for vibration and shock (10 gn 11 ms in operation per IEC 60068-2-27).