Schneider SH30401P17A2100 170 W Motor
MPNSH30401P17A2100
Active
SH30401P17A2100 - 18NM 170W IP65 K by SCHNEIDER ELECTRIC
$1,084.58Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 115...480 V |
| Maximum current irms | 4.5 A |
| Output current 3s peak | 4.5 A |
| Continuous stall current | 1.12 A |
| Continuous power | 170 W |
| Nominal output power | 77 W at 115 V single phase 77 W at 230 V single phase 166 W at 400 V three phase 166 W at 480 V three phase |
| Number of motor poles | 5.0 |
| Network number of phases | 3 |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
All specifications
| Parameter | Value |
|---|---|
| Mounting support | International standard flange |
| Mounting holes diameter | 4.5 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 46 mm |
| Electrical connection | rotatable right angled connector |
| Key width | 3 mm |
| Centring collar depth | 2.5 mm |
| Length | 73.4 mm |
| Inertia | 0.0 kg.cm² of brake 0.023 kg.cm² of motor |
| Shaft end | Parallel key |
| Shaft length | 25 mm |
| Holding brake | Without |
| Nominal speed | 4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase |
| Rotor inertia | 0.0232 kg.cm² |
| Nominal torque | 0.176 N.m at 115 V single phase 0.176 N.m at 230 V single phase 0.184 N.m at 400 V three phase 0.184 N.m at 480 V three phase |
| Shaft diameter | 8 mm |
| Torque constant | 0.19 N.m/A at 120 °C |
| Sizing reference | SH30402P |
| Back emf constant | 13.6 V/krpm at 20 °C |
| Device short name | SH3 |
| Motor flange size | 40 mm |
| Peak stall torque | 0.75 N.m at 480 V three phase |
| Stator inductance | 7.3 mH |
| Stator resistance | 17.2 Ohm |
| Temperature copper hot | 120 °C |
| Continuous stall torque | 0.21 N.m at 115...480 V three phase |
| Centring collar diameter | 30 mm |
| Maximum mechanical speed | 9000 rpm |
| Speed feedback resolution | 16 periods |
MPN
SH30401P17A2100