Schneider Electric SH30401P17F2000
MPNSH30401P17F2000
Active
SH3 servomotor, 40mm, 1 stack, keyed Shaft, SinCos Multiturn 16, Brake, angular, IP54/65
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 115...480 V |
| Maximum current irms | 4.5 A |
| Output current 3s peak | 4.5 A |
| Continuous stall current | 1.12 A |
| Continuous power | 170 W |
| Nominal output power | 77 W 115 V single phase 77 W 230 V single phase 166 W 400 V three phase 166 W 480 V three phase |
| Number of motor poles | 5.0 |
| Phases | Three phase |
| Network number of phases | 3 |
All specifications
| Parameter | Value |
|---|---|
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.2 in (4.5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 1.8 in (46 mm) |
| Electrical connection | Rotatable right angled connector |
| Key width | 0.1 in (3 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Length | 3.9 in (99.4 mm) |
| Inertia | 0.017 kg.cm² of brake 0.023 kg.cm² of motor |
| Category | US1PC5218359 |
| Shaft end | Parallel key |
| Shaft length | 1.0 in (25 mm) |
| Holding brake | With |
| Nominal speed | 4000 rpm 115 V single phase 4000 rpm 230 V single phase 9000 rpm 400 V three phase 9000 rpm 480 V three phase |
| Rotor inertia | 0.04 kg.cm² |
| Holding torque | 3.5 lbf.in (0.4 N.m) |
| Nominal torque | 1.558 lbf.in (0.176 N.m) 115 V single phase 1.558 lbf.in (0.176 N.m) 230 V single phase 1.629 lbf.in (0.184 N.m) 400 V three phase 1.629 lbf.in (0.184 N.m) 480 V three phase |
| Shaft diameter | 0.3 in (8 mm) |
| Torque constant | 0.19 N.m/A 248 °F (120 °C) |
| Sizing reference | SH30402P |
| Back emf constant | 13.6 V/krpm 68 °F (20 °C) |
| Device short name | SH3 |
| Motor flange size | 1.6 in (40 mm) |
| Peak stall torque | 6.64 lbf.in (0.75 N.m) 480 V three phase |
| Stator inductance | 7.3 mH |
| Stator resistance | 17.2 Ohm |
| Temperature copper hot | 248 °F (120 °C) |
| Continuous stall torque | 1.86 lbf.in (0.21 N.m) 115...480 V three phase |
| Centring collar diameter | 1.2 in (30 mm) |
| Maximum mechanical speed | 9000 rpm |
| Speed feedback resolution | 16 periods |
MPN
SH30401P17F2000