Schneider Electric SH30402P06A2000
MPNSH30402P06A2000
Active
SH3 servomotor, 40mm, 2 stacks, smooth Shaft, SinCos Singleturn 16, no Brake, angular, IP54/65
$738.18Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Absolute single turn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 115...480 V |
| Maximum current irms | 7.2 A |
| Output current 3s peak | 7.2 A |
| Continuous stall current | 1.5 A |
| Continuous power | 290 W |
| Nominal output power | 152 W 115 V single phase 152 W 230 V single phase 275 W 400 V three phase 289 W 480 V three phase |
| Number of motor poles | 5.0 |
| Phases | Three phase |
| Network number of phases | 3 |
All specifications
| Parameter | Value |
|---|---|
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
| Mounting support | International standard flange |
| Mounting holes diameter | 0.2 in (4.5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 1.8 in (46 mm) |
| Electrical connection | rotatable right angled connector |
| Centring collar depth | 0.10 in (2.5 mm) |
| Length | 3.7 in (93.4 mm) |
| Inertia | 0.0 kg.cm² of brake 0.042 kg.cm² of motor |
| Category | US1PC5218359 |
| Shaft end | Smooth shaft |
| Shaft length | 1.0 in (25 mm) |
| Holding brake | Without |
| Nominal speed | 4000 rpm 115 V single phase 4000 rpm 230 V single phase 9000 rpm 400 V three phase 9000 rpm 480 V three phase |
| Rotor inertia | 0.0419 kg.cm² |
| Nominal torque | 2.584 lbf.in (0.292 N.m) 115 V single phase 2.584 lbf.in (0.292 N.m) 230 V single phase 2.74 lbf.in (0.31 N.m) 400 V three phase 2.74 lbf.in (0.31 N.m) 480 V three phase |
| Shaft diameter | 0.3 in (8 mm) |
| Torque constant | 0.26 N.m/A 248 °F (120 °C) |
| Sizing reference | SH30402P |
| Back emf constant | 18 V/krpm 68 °F (20 °C) |
| Device short name | SH3 |
| Motor flange size | 1.6 in (40 mm) |
| Peak stall torque | 13.3 lbf.in (1.5 N.m) 480 V three phase |
| Stator inductance | 6.4 mH |
| Stator resistance | 11.6 Ohm |
| Temperature copper hot | 248 °F (120 °C) |
| Continuous stall torque | 3.45 lbf.in (0.39 N.m) 115...480 V three phase |
| Centring collar diameter | 1.2 in (30 mm) |
| Maximum mechanical speed | 9000 rpm |
| Speed feedback resolution | 16 periods |
MPN
SH30402P06A2000