Skip to main content
Log in
Schneider Electric SH30402P06A2100 — Servo Motors with Brake

Schneider Electric SH30402P06A2100 Servo Motor, 290 W

MPNSH30402P06A2100
Active

Schneider Electric SH3 servo motor, SH30402P06A2100, 290 W continuous power, 9000 rpm max speed, 0.31 N.m nominal torque at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, smooth shaft, IP65, without holding brake.

Schneider Electric SH30402P06A2100 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SH30402P06A2100 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30402P06A2100 — Performance
ParameterValue
Nominal torque0.292 N.m at 115 V single phase 0.292 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase
Nominal output power152 W at 115 V single phase 152 W at 230 V single phase 275 W at 400 V three phase 289 W at 480 V three phase
Continuous power290 W
Nominal speed4000 rpm at 115 V single phase 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase
Maximum mechanical speed9000 rpm
Continuous stall torque0.39 N.m at 115...480 V three phase
Peak stall torque1.5 N.m at 480 V three phase
Rotor inertia0.0419 kg.cm²
SH30402P06A2100 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
Maximum current (Irms)7.2 A
Continuous stall current1.5 A
Torque constant0.26 N.m/A at 120 °C
Back-EMF constant18 V/krpm at 20 °C
Number of motor poles5.0
Stator resistance11.6 Ohm
Stator inductance6.4 mH
Electrical connectionrotatable right angled connector
SH30402P06A2100 — Feedback
ParameterValue
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution16 periods
SH30402P06A2100 — Mechanical
ParameterValue
Shaft end styleSmooth shaft
Shaft diameter8 mm
Shaft length25 mm
Motor flange size40 mm
Mounting supportInternational standard flange
Length93.4 mm
Number of mounting holes4
Mounting-hole diameter4.5 mm
Mounting-hole bolt circle diameter46 mm
Centring collar diameter30 mm
Centring collar depth2.5 mm
SH30402P06A2100 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature120 °C

Product details

290 W servo with 9000 rpm top end

This SH30402P06A2100 is a 290 W continuous power servo motor from the Schneider SH3 frame family. The nominal speed hits 4000 rpm on single-phase 115/230 V and 9000 rpm on three-phase 400/480 V — that high-speed ceiling suits direct-drive spindles or pick-and-place axes where cycle time is the constraint.

Absolute encoder, no brake, IP65

Feedback comes from an absolute single-turn SinCos Hiperface encoder — no homing sequence needed on power-up, position is known immediately. The motor is rated IP65 at the housing and shaft bushing per IEC 60034-5, so it handles washdown in food or beverage lines without a secondary cover. There is no holding brake on this variant — the load must be held by the drive's holding current or an external brake. The electrical connection is a rotatable right-angled connector, which helps in tight cable-routing spaces.

Frequently asked questions

What is the shaft diameter and length on SH30402P06A2100?

Shaft diameter is 8 mm and shaft length is 25 mm. The shaft end is smooth — no keyway, so a clamping coupling is required.

MPN
SH30402P06A2100