SH30402P1DF4100 (Schneider Electric) — datasheet specifications below.
SH30402P1DF4100 Servo Motors with Brake
MPNSH30402P1DF4100
Active
SH30402P1DF4100 (Schneider Electric) — datasheet specifications below.
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Product type | Servo motor |
| Holding brake | With |
| Parameter | Value |
|---|---|
| Nominal torque | 0.37 N.m at 230 V single phase 0.31 N.m at 400 V three phase 0.31 N.m at 480 V three phase 9.7 N.m at 480 V three phase |
| Nominal output power | 152 W at 230 V single phase 292 W at 400 V three phase 292 W at 480 V three phase 3660 W at 480 V three phase |
| Continuous power | 290 W |
| Nominal speed | 4000 rpm at 230 V single phase 9000 rpm at 400 V three phase 9000 rpm at 480 V three phase 3600 rpm at 480 V three phase |
| Maximum mechanical speed | 10000 rpm |
| Continuous stall torque | 0.39 N.m at 115...480 V three phase |
| Peak stall torque | 1.5 N.m at 480 V three phase |
| Holding brake torque | 0.4 N.m |
| Rotor inertia | 0.0588 kg.cm² |
| Parameter | Value |
|---|---|
| Rated supply voltage (Us) | 115...480 V |
| Network phases | 3 |
| Maximum current (Irms) | 7.2 A |
| Continuous stall current | 1.5 A |
| Torque constant | 0.26 N.m/A at 120 °C |
| Back-EMF constant | 18 V/krpm at 20 °C |
| Number of motor poles | 5 |
| Stator resistance | 11.6 Ohm |
| Stator inductance | 12.8 mH |
| Electrical connection | quicklock rotatable right angled connector |
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn Hiperface DSL |
| Speed feedback resolution | 32768 points/turn x 4096 turns |
| Parameter | Value |
|---|---|
| Shaft end style | Parallel key |
| Shaft diameter | 8 mm |
| Shaft length | 25 mm |
| Key width | 3 mm |
| Motor flange size | 40 mm |
| Mounting support | International standard flange |
| Length | 130.9 mm |
| Number of mounting holes | 4 |
| Mounting-hole diameter | 4.5 mm |
| Mounting-hole bolt circle diameter | 46 mm |
| Centring collar diameter | 30 mm |
| Centring collar depth | 2.5 mm |
| Parameter | Value |
|---|---|
| IP degree of protection | IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 |
| Cooling method | Natural convection |
| Winding (copper hot) temperature | 130 °C |
Product details
MPN
SH30402P1DF4100