Skip to main content
Log in
Schneider Electric SH30701P0BA3000

Schneider SH30701P0BA3000 PacDrive 3 servo motor, 690 W, 8000 rpm

MPNSH30701P0BA3000
Obsolete

Schneider Electric PacDrive 3 SH30701P0BA3000 servo motor, 3-pole, three-phase, 690 W at 400/480 V, 8000 rpm max, 1.25 N.m torque, absolute multiturn Hiperface DSL encoder, IP65, smooth shaft, no brake.

$2,080.00Ref. price · indicative, final on quote
Schneider Electric SH30701P0BA3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30701P0BA3000 key specifications
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms5.7 A
Continuous stall current1.8 A
Continuous power690 W
Nominal output power370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase
Number of motor poles3
PhasesThree phase
Network number of phases3
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5

All specifications

SH30701P0BA3000 additional specifications
ParameterValue
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.2 in (82 mm)
Electrical connectionRotatable right angled connector
Centring collar depth0.10 in (2.5 mm)
Length6.06 in (154 mm)
CategoryUS1PC5218359
Shaft endSmooth shaft
Shaft length0.9 in (23 mm)
Holding brakeWithout
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Rotor inertia0.250 kg.cm²
Nominal torque12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant0.69 N.m/A 248 °F (120 °C)
Sizing referenceSH30701P
Back emf constant46 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size2.8 in (70 mm)
Peak stall torque31.0 lbf.in (3.5 N.m) 115...480 V three phase
Stator inductance42.6 mH
Stator resistance10.4 Ohm
Maximum axial force fa80 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque11.06 lbf.in (1.25 N.m) 115...480 V three phase
Maximum radial force fr730 N 1000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution262144 points/turn x 4096 turns

Product details

Overview

The SH30701P0BA3000 is a Schneider PacDrive 3 servo motor rated 690 W at 400/480 V three-phase, delivering 1.25 N.m continuous torque with a top speed of 8000 rpm. It carries an absolute multiturn Hiperface DSL encoder resolving 262144 points per turn over 4096 turns, sealed to IP65, and ships with a smooth shaft and no holding brake.

The SH30701P0BA3000 uses a 3-pole design with a 5.7 A current maximum, while the functionally similar MH30701P01A2200 uses 5 poles and draws 5.97 A; both deliver the same 690 W at 400/480 V three-phase, so the pole count and current draw are the key selection differences for drive matching.

MPN
SH30701P0BA3000