Skip to main content
Log in
Schneider Electric SH30701P1BA3000

Schneider SH30701P1BA3000 PacDrive 3 servo motor, 690 W, 8000 rpm

MPNSH30701P1BA3000
Obsolete

Schneider SH30701P1BA3000 Motors — now discontinued, supplied from remaining surplus and broker stock.

$2,685.00Ref. price · indicative, final on quote
Schneider Electric SH30701P1BA3000 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

SH30701P1BA3000 key specifications
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms5.7 A
Continuous stall current1.8 A
Continuous power690 W
Nominal output power370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase
Number of motor poles3
PhasesThree phase
Network number of phases3
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5

All specifications

SH30701P1BA3000 additional specifications
ParameterValue
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.2 in (82 mm)
Electrical connectionquicklock straight connector
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length6.06 in (154 mm)
CategoryUS1PC5218359
Shaft endParallel key
Shaft length0.9 in (23 mm)
Holding brakeWithout
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Rotor inertia0.250 kg.cm²
Nominal torque12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant0.69 N.m/A 248 °F (120 °C)
Sizing referenceSH30701P
Back emf constant46 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size2.8 in (70 mm)
Peak stall torque31.0 lbf.in (3.5 N.m) 115...480 V three phase
Stator inductance42.6 mH
Stator resistance10.4 Ohm
Maximum axial force fa80 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque11.06 lbf.in (1.25 N.m) 115...480 V three phase
Maximum radial force fr730 N 1000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution262144 points/turn x 4096 turns

Product details

Overview

The SH30701P1BA3000 is a 3-pole PacDrive 3 servo motor from Schneider, rated 690 W continuous power with a top speed of 8000 rpm and a continuous torque of 1.25 N.m. It carries an absolute multiturn Hiperface DSL encoder resolving 262144 points per turn over 4096 turns, and is sealed to IP65.

The 1.25 N.m continuous torque and 0.250 kg.cm² rotor inertia suit it for light-to-medium dynamic positioning. The 8000 rpm top speed and 80 N axial / 730 N radial force capacity at 1000 rpm give headroom for high-speed indexing or belt-driven axes. The 42.6 mH inductance and 10.4 Ohm resistance pair with a 46 V/krpm back-EMF constant, so match it to a PacDrive 3 drive rated for the 5.7 A peak current.

Compared to the MH30701P01A2200, the SH30701P1BA3000 has 3 poles versus 5, a 5.7 A current maximum versus 5.97 A, and a switching current of 1.8 A versus 1.78 A. The power output is identical at 690 W on three-phase 400 V or 480 V, but the SH30701P1BA3000 also supports 370 W on 230 V single-phase, which the MH30701P01A2200 does not.

MPN
SH30701P1BA3000