Schneider Electric PacDrive 3 SH30701P1BA3100 servo motor, 3-pole, three-phase, 690 W, 8000 rpm max, 1.25 N.m torque, absolute multiturn Hiperface DSL encoder, IP65, 5.7 A, parallel key shaft, no brake.
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn Hiperface DSL |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 115...480 V |
| Maximum current irms | 5.7 A |
| Continuous stall current | 1.8 A |
| Continuous power | 690 W |
| Nominal output power | 370 W 230 V single phase 690 W 400 V three phase 690 W 480 V three phase |
| Number of motor poles | 3 |
| Phases | Three phase |
| Network number of phases | 3 |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
| Parameter | Value |
|---|---|
| Mounting support | International standard flange |
| Mounting holes diameter | 0.2 in (5.5 mm) |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 3.2 in (82 mm) |
| Electrical connection | quicklock straight connector |
| Key width | 0.2 in (4 mm) |
| Centring collar depth | 0.10 in (2.5 mm) |
| Length | 6.06 in (154 mm) |
| Category | US1PC5218359 |
| Shaft end | Parallel key |
| Shaft length | 0.9 in (23 mm) |
| Holding brake | Without |
| Nominal speed | 3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase |
| Rotor inertia | 0.250 kg.cm² |
| Nominal torque | 12.4 lbf.in (1.4 N.m) 230 V single phase 9.7 lbf.in (1.1 N.m) 400 V three phase 9.7 lbf.in (1.1 N.m) 480 V three phase |
| Shaft diameter | 0.4 in (11 mm) |
| Torque constant | 0.69 N.m/A 248 °F (120 °C) |
| Sizing reference | SH30701P |
| Back emf constant | 46 V/krpm 68 °F (20 °C) |
| Device short name | SH3 |
| Motor flange size | 2.8 in (70 mm) |
| Peak stall torque | 31.0 lbf.in (3.5 N.m) 115...480 V three phase |
| Stator inductance | 42.6 mH |
| Stator resistance | 10.4 Ohm |
| Maximum axial force fa | 160 N |
| Temperature copper hot | 266 °F (130 °C) |
| Continuous stall torque | 11.06 lbf.in (1.25 N.m) 115...480 V three phase |
| Maximum radial force fr | 900 N 1000 rpm |
| Centring collar diameter | 2.4 in (60 mm) |
| Maximum mechanical speed | 8000 rpm |
| Speed feedback resolution | 262144 points/turn x 4096 turns |
The SH30701P1BA3100 is a Schneider PacDrive 3 servo motor rated 690 W on three-phase supply, delivering 1.25 N.m continuous torque at speeds up to 8000 rpm. It carries an absolute multiturn Hiperface DSL encoder resolving 262144 points per turn over 4096 turns, sealed to IP65, and runs on natural convection cooling.
No related articles