Skip to main content
Log in
Schneider Electric SH30702M01A1200 — Servo Motors with Brake

Schneider Electric SH30702M01A1200 Servo Motor, 640 W

MPNSH30702M01A1200
Obsolete

Schneider Electric SH3 series servo motor, SH30702M01A1200, 640 W continuous power, 3000 rpm at 400 V three-phase, absolute single-turn SinCos Hiperface encoder, IP65/IP67, smooth shaft, without brake.

Schneider Electric SH30702M01A1200 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30702M01A1200 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30702M01A1200 — Performance
ParameterValue
Nominal torque19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase
Nominal output power700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase
Continuous power640 W
Nominal speed750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase
Maximum mechanical speed8000 rpm
Continuous stall torque18.06 lbf.in (2.04 N.m) 115...480 V three phase
Peak stall torque67.3 lbf.in (7.6 N.m) 115...480 V three phase
Rotor inertia0.41 kg.cm²
SH30702M01A1200 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
PhaseThree phase
Maximum current (Irms)6.0 A
Continuous stall current1.5 A
Torque constant1.36 N.m/A 248 °F (120 °C)
Back-EMF constant95.9 V/krpm 68 °F (20 °C)
Number of motor poles3
Stator resistance16.4 Ohm
Stator inductance41.55 mH
Electrical connectionRotatable right angled connector
SH30702M01A1200 — Feedback
ParameterValue
Encoder typeAbsolute single turn SinCos Hiperface
Speed feedback resolution128 periods
SH30702M01A1200 — Mechanical
ParameterValue
Shaft end styleSmooth shaft
Shaft diameter0.4 in (11 mm)
Shaft length0.9 in (23 mm)
Key width0.2 in (4 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length7.4 in (187 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Maximum axial force (Fa)80 N
SH30702M01A1200 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature266 °F (130 °C)

Product details

640 W SH3 servo — speed and torque across supply voltages

The SH30702M01A1200 is a Schneider Electric SH3 series servo motor rated for 640 W continuous power, with a nominal speed that depends on the supply: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. Nominal torque ranges from 2.2 N.m at 115 V single-phase down to 2.03 N.m at 480 V three-phase; peak stall torque is 7.6 N.m across the 115–480 V three-phase range. The motor uses an absolute single-turn SinCos Hiperface encoder for position feedback — no homing sequence needed on power-up, which simplifies commissioning on multi-axis lines.

IP65/IP67 sealing and smooth shaft — washdown-ready without a brake

IP65-rated motor body and shaft bushing, with IP67-rated housing per IEC 60034-5 — the motor withstands direct washdown in food-and-beverage or wet machining environments. Smooth shaft end (no keyway) and no holding brake — the load must be held externally if the application requires a vertical-axis stop. Electrical connection options include a rotatable right-angled connector or a straight connector, giving flexibility for cable routing in tight cabinets. Mounting uses an international standard flange with a 70 mm flange size and 60 mm centring collar — fits common servo brackets without adapter plates.

Frequently asked questions

What encoder type does SH30702M01A1200 use?

It uses an absolute single-turn SinCos Hiperface encoder, which provides position feedback without requiring a homing routine on power-up.

What is the continuous power rating of SH30702M01A1200?

Continuous power is 640 W, with nominal output power varying by supply: 700 W at 115 V single-phase, 340 W at 230 V single-phase, 660 W at 400 V three-phase, and 780 W at 480 V three-phase.

Does SH30702M01A1200 include a holding brake?

No, this variant is supplied without a holding brake — the load must be held externally for vertical-axis applications.

MPN
SH30702M01A1200