Motor torque and speed across supply lines
The SH30702M01A2000 delivers 2.2 N.m nominal torque at 750 rpm on 115 V single-phase, 2.15 N.m at 1500 rpm on 230 V single-phase, and 2.03 N.m at 3000 rpm on 400 V three-phase — the torque derates slightly as the speed and voltage increase, but the motor maintains usable output across all listed supply configurations. Peak stall torque reaches 7.6 N.m on three-phase supplies from 115 to 480 V, giving the cell a 3.7× torque margin for acceleration through intermittent moves.
Feedback and sealing for the machine envelope
The absolute single-turn SinCos Hiperface encoder eliminates the need for a home cycle on power-up — the drive knows the rotor position immediately, which shaves the handshake time on a pick-and-place or palletizing cell.
Mechanical interface and load limits
The 70 mm flange with a 60 mm centring collar and 5.5 mm mounting holes fits the standard international flange pattern — the smooth 11 mm shaft with a 4 mm keyway and 23 mm shaft length accepts standard couplings without a shaft seal ring. Maximum radial force is 710 N at 1000 rpm, dropping to 390 N at 6000 rpm — the bearing load limit follows the speed, so a direct-coupled load at high speed must stay well below the low-speed rating.