Speed range across supply voltages
The SH30702M01F1000: This SH3 servo delivers 750 rpm on 115 V single-phase, 1500 rpm on 230 V single-phase, 3000 rpm on 400 V three-phase, and 3600 rpm on 480 V three-phase — the speed ceiling is supply-dependent, not motor-limited. Maximum mechanical speed is 8000 rpm, so the motor itself can spin faster than any listed nominal; the drive and supply voltage set the operating point.
Torque delivery for vertical-axis loads
Holding brake torque is 3 Nm (26.6 lbf.in) — this holds the load at standstill without power to the motor windings, critical for Z-axis or gravity-loaded applications. Nominal torque varies by supply: 2.2 Nm at 115 V single-phase, 2.15 Nm at 230 V single-phase, and 2.03 Nm at 400/480 V three-phase. Peak stall torque reaches 7.6 Nm across the three-phase range, giving headroom for acceleration transients. Continuous stall torque is 2.04 Nm at 1.5 A continuous stall current — this is the thermal limit for sustained holding without forced cooling.
Feedback and sealing for production environments
Absolute single-turn SinCos Hiperface encoder provides position feedback at power-up without a homing cycle — reduces commissioning time on multi-axis lines. IP65 rating on the motor body and shaft bushing (with seal ring) means it withstands washdown and particulate ingress common in food, packaging, or machining coolant environments. Without the shaft seal ring, the bushing drops to IP54. Natural convection cooling — no fan to clog or fail, but the 640 W continuous power rating assumes free airflow around the 70 mm flange-mounted body.
No minimum order quantity stated beyond the single-unit package count.