Speed range and voltage matching
The SH30702M01F1100: On single-phase 115 V or 230 V it runs at 750 rpm or 1500 rpm respectively, so the drive parameter set must match the line voltage the motor sees at the cabinet. Maximum mechanical speed is 8000 rpm, well above the nominal range, giving headroom for field weakening above base speed if the application needs it.
Encoder and feedback for closed-loop position
Fitted with an absolute single-turn SinCos Hiperface encoder — this is a multi-signal feedback interface that transmits absolute position within one revolution plus incremental sine/cosine tracks for velocity control. The Hiperface protocol is standard across Schneider's Lexium drive family, so the motor mates directly without a separate feedback adapter card.
Holding brake and torque profile
The integrated holding brake delivers 3 N.m (26.6 lbf.in) static holding torque — enough to lock a vertical axis at rest without the drive holding current. Continuous stall torque is 2.04 N.m across the 115–480 V three-phase range, and peak stall torque reaches 7.6 N.m for short-duration acceleration or breakaway loads. Nominal torque at rated speed varies slightly by supply: 2.2 N.m on 115 V single-phase, 2.15 N.m on 230 V single-phase, and 2.03 N.m on 400 V or 480 V three-phase. The torque constant is 1.36 N.m/A at 120 °C copper temperature.
IP65 enclosure and connector options
IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the seal holds against hose-directed water and dust ingress, so the motor can be mounted in washdown zones or dusty mill environments without a secondary cover. The electrical connection is available as either a rotatable right-angle connector or a straight connector — choose the version that fits the cable exit direction in your cable tray or conduit layout. Both options are factory-fitted; the connector is not field-swappable between the two styles.
Mechanical interface and mounting
International standard flange, 70 mm square (2.8 in), with a 60 mm centring collar and 2.5 mm collar depth. The shaft is 11 mm diameter, 23 mm long, smooth (no keyway), with a 4 mm key width if a key is added — the smooth shaft suits a clamp-type coupling directly, while the keyway provision allows a positive-drive connection when specified.
No official successor or cross-reference part is published by Schneider for this order code. The SH30702M sizing reference anchors the frame size and winding variant; any replacement would need to match the 70 mm flange, 11 mm shaft, Hiperface feedback, and holding brake torque.