Speed and power by supply voltage
The SH30702M01F1200: This motor delivers different speed and output power depending on the supply. On 400 V three-phase: 3000 rpm nominal, 660 W output. On 480 V three-phase: 3600 rpm, 780 W output. On single-phase 230 V: 1500 rpm, 340 W; on 115 V single-phase: 750 rpm, 700 W. The continuous power rating is 640 W.
Torque at stall and in motion
Holding torque with the brake engaged is 3 N·m (26.6 lbf·in). Continuous stall torque across the 115–480 V three-phase range is 2.04 N·m (18.06 lbf·in). Peak stall torque hits 7.6 N·m (67.3 lbf·in) — useful for short overloads. Nominal torque varies by voltage: 2.2 N·m at 115 V single-phase, 2.15 N·m at 230 V, and 2.03 N·m at 400/480 V three-phase.
Encoder and feedback
The feedback device is an absolute single-turn SinCos Hiperface encoder. This gives position at power-up without a homing cycle — critical for applications where the machine must resume from the last known position after a power loss. Single-turn limits absolute position tracking to one shaft revolution; for multi-turn applications, a separate multi-turn encoder or external counter is needed.
Sealing and environmental fit
Rated IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5. This means the motor withstands washdown spray and temporary immersion — suitable for food-and-beverage or wet-floor environments. Cooling is natural convection, so no forced air or coolant lines are needed.
Physical package and mounting
70 mm (2.8 in) flange size, international standard. Overall length 212.5 mm (8.4 in). Shaft is 11 mm diameter, 23 mm length, smooth (no keyway). Centring collar 60 mm diameter, 2.5 mm deep. Mounting holes on 5.5 mm diameter. Rotatable right-angle connector or straight connector options — the listing carries both, so verify which is needed for the cable exit direction.