Skip to main content
Log in
Schneider Electric SH30702M12A2100 — Servo Motors with Brake

Schneider Electric SH30702M12A2100 Servo Motor, 640 W

MPNSH30702M12A2100
Obsolete

Schneider Electric SH3 series servo motor, SH30702M12A2100, 640 W continuous power, 3000 rpm nominal speed at 400 V three-phase, IP65, absolute multiturn SinCos Hiperface encoder, 70 mm flange, parallel key shaft.

Schneider Electric SH30702M12A2100 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30702M12A2100 — Identification
ParameterValue
Product typeServo motor
Holding brakeWithout
SH30702M12A2100 — Performance
ParameterValue
Nominal torque19.5 lbf.in (2.2 N.m) 115 V single phase 19.03 lbf.in (2.15 N.m) 230 V single phase 17.97 lbf.in (2.03 N.m) 400 V three phase 17.97 lbf.in (2.03 N.m) 480 V three phase
Nominal output power700 W 115 V single phase 340 W 230 V single phase 660 W 400 V three phase 780 W 480 V three phase
Continuous power640 W
Nominal speed750 rpm 115 V single phase 1500 rpm 230 V single phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase
Maximum mechanical speed8000 rpm
Continuous stall torque18.06 lbf.in (2.04 N.m) 115...480 V three phase
Peak stall torque67.3 lbf.in (7.6 N.m) 115...480 V three phase
Rotor inertia0.41 kg.cm²
SH30702M12A2100 — Electrical
ParameterValue
Rated supply voltage (Us)115...480 V
Network phases3
PhaseThree phase
Maximum current (Irms)6.0 A
Continuous stall current1.5 A
Torque constant1.36 N.m/A 248 °F (120 °C)
Back-EMF constant95.9 V/krpm 68 °F (20 °C)
Number of motor poles3
Stator resistance16.4 Ohm
Stator inductance41.55 mH
Electrical connectionStraight connector
SH30702M12A2100 — Feedback
ParameterValue
Encoder typeAbsolute multiturn SinCos Hiperface
Speed feedback resolution128 periods
SH30702M12A2100 — Mechanical
ParameterValue
Shaft end styleParallel key
Shaft diameter0.4 in (11 mm)
Shaft length0.9 in (23 mm)
Key width0.2 in (4 mm)
Motor flange size2.8 in (70 mm)
Mounting supportInternational standard flange
Length7.4 in (187 mm)
Number of mounting holes4
Mounting-hole diameter0.2 in (5.5 mm)
Mounting-hole bolt circle diameter3.2 in (82 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Maximum radial force (Fr)710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm
Maximum axial force (Fa)80 N
SH30702M12A2100 — Environmental
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5
Cooling methodNatural convection
Winding (copper hot) temperature266 °F (130 °C)

Product details

700 W nominal output across voltage variants

The SH30702M12A2100 delivers a nominal output power that changes with the supply: 700 W at 115 V single-phase, 340 W at 230 V single-phase, 660 W at 400 V three-phase, and 780 W at 480 V three-phase. Nominal torque ranges from 17.97 lbf.in (2.03 N.m) on three-phase supplies to 19.5 lbf.in (2.2 N.m) on 115 V single-phase. Nominal speed also shifts with voltage: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The continuous power rating is 640 W across the range.

Absolute multiturn encoder — no homing required

The absolute multiturn SinCos Hiperface encoder reports position and turns count on power-up without a reference run. This eliminates the homing sequence typical of incremental encoders, reducing commissioning time on multi-axis machines.

IP65 — washdown-ready motor and shaft bushing

Both the motor body and the shaft bushing carry an IP65 rating per IEC 60034-5.

Frequently asked questions

How do I get current pricing and availability for SH30702M12A2100?

The motor is sourced through authorized distribution.

What is SH30702M12A2100's listed phase?

Three phase — the motor is designed for three-phase supply, but also operates on single-phase inputs at derated speed and torque as shown in the nominal speed and torque tables.

What is SH30702M12A2100's listed length?

The motor length is 7.4 in (187 mm).

What compliance documentation does Schneider Electric provide for SH30702M12A2100?

The motor carries an IP65 rating per IEC 60034-5. Full compliance documentation — including RoHS, REACH, and UL declarations — is available from Schneider Electric upon request.

MPN
SH30702M12A2100