Skip to main content
Log in
Schneider Electric SH30702P0BF3000

Schneider SH30702P0BF3000 PacDrive 3 servo motor, 2.04 N.m, 8000 rpm

MPNSH30702P0BF3000
Obsolete

Schneider SH30702P0BF3000 Motors — now discontinued, supplied from remaining surplus and broker stock.

$2,755.00Ref. price · indicative, final on quote
Schneider Electric SH30702P0BF3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30702P0BF3000 key specifications
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms11.8 A
Continuous stall current2.9 A
Continuous power1130 W
Brake pull-in power7 W
Nominal output power610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase
Number of motor poles3
PhasesThree phase
Network number of phases3

All specifications

SH30702P0BF3000 additional specifications
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.2 in (82 mm)
Electrical connectionRotatable right angled connector
Centring collar depth0.10 in (2.5 mm)
Length8.4 in (213 mm)
CategoryUS1PC5218359
Shaft endSmooth shaft
Shaft length0.9 in (23 mm)
Holding brakeWith
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Rotor inertia0.482 kg.cm²
Holding torque26.6 lbf.in (3 N.m)
Nominal torque18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant0.7 N.m/A 248 °F (120 °C)
Sizing referenceSH30702P
Back emf constant48 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size2.8 in (70 mm)
Peak stall torque67.3 lbf.in (7.6 N.m) 115...480 V three phase
Stator inductance21.3 mH
Stator resistance4.2 Ohm
Maximum axial force fa160 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque18.06 lbf.in (2.04 N.m) 115...480 V three phase
Maximum radial force fr990 N 1000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution262144 points/turn x 4096 turns

Product details

Overview

The SH30702P0BF3000 is a Schneider PacDrive 3 servo motor delivering 2.04 N.m continuous torque at 1130 W, with a top speed of 8000 rpm on a 3-phase supply. It carries an absolute multiturn Hiperface DSL encoder, a holding brake, and a smooth shaft, sealed to IP65.

The 2.04 N.m continuous torque and 8000 rpm top speed suit high-speed indexing or light machining axes. The holding brake holds the load at standstill, making it a fit for vertical Z-axis applications where the motor must hold position when power is removed.

Compared to the MH30701P01A2200 (5 poles, 5.97 A max, 1.78 A switching), the SH30702P0BF3000 runs at 3 poles, draws 11.8 A max, and switches 2.9 A, delivering higher peak current capacity for faster acceleration profiles.

MPN
SH30702P0BF3000