What speed and torque can this motor deliver across supply voltages?
The SH30702P12A1000 is a three-phase servo motor that delivers nominal speeds ranging from 1500 rpm on 115 V single-phase up to 7200 rpm on 480 V three-phase, with 6000 rpm at 400 V three-phase being the typical rating for European mains. Nominal torque varies with supply: 19.03 lbf·in (2.15 N·m) at 115 V single-phase, dropping to 15.9 lbf·in (1.8 N·m) at 400 V and 480 V three-phase — the higher speeds trade torque for power. Continuous power is 1130 W, with peak stall torque of 67.3 lbf·in (7.6 N·m) across the 115–480 V three-phase range, giving you the headroom for acceleration transients in pick-and-place or indexing applications.
Encoder feedback and environmental protection
The motor carries an absolute multiturn SinCos Hiperface encoder, which provides position feedback without a home cycle on power-up — critical for applications where the machine must resume from a known position after a power loss. IP protection is IP54 at the shaft bushing without a shaft seal ring, and IP65 on the motor body and shaft bushing with the seal ring fitted. For washdown or dusty environments, specify the seal ring to keep the bearings and encoder clean.