Skip to main content
Log in
Schneider Electric SH30702P1AA3000

Schneider SH30702P1AA3000 PacDrive 3 servo motor, 2.04 N.m, 8000 rpm

MPNSH30702P1AA3000
Obsolete

Schneider Electric PacDrive 3 SH30702P1AA3000 servo motor, 3-pole, three-phase, 2.04 N.m rated torque, 8000 rpm max speed, 1130 W at 480 V three-phase, IP65, absolute single-turn Hiperface DSL encoder, parallel key shaft, no brake.

$1,900.00Ref. price · indicative, final on quote
Schneider Electric SH30702P1AA3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30702P1AA3000 key specifications
ParameterValue
Encoder typeAbsolute single turn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms11.8 A
Continuous stall current2.9 A
Continuous power1130 W
Nominal output power610 W 230 V single phase 1130 W 400 V three phase 1130 W 480 V three phase
Number of motor poles3
PhasesThree phase
Network number of phases3
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5

All specifications

SH30702P1AA3000 additional specifications
ParameterValue
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.2 in (82 mm)
Electrical connectionRotatable right angled connector
Key width0.2 in (4 mm)
Centring collar depth0.10 in (2.5 mm)
Length7.4 in (187 mm)
CategoryUS1PC5218359
Shaft endParallel key
Shaft length0.9 in (23 mm)
Holding brakeWithout
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Rotor inertia0.410 kg.cm²
Nominal torque18.6 lbf.in (2.1 N.m) 230 V single phase 15.9 lbf.in (1.8 N.m) 400 V three phase 15.9 lbf.in (1.8 N.m) 480 V three phase
Shaft diameter0.4 in (11 mm)
Torque constant0.7 N.m/A 248 °F (120 °C)
Sizing referenceSH30702P
Back emf constant48 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size2.8 in (70 mm)
Peak stall torque67.3 lbf.in (7.6 N.m) 115...480 V three phase
Stator inductance21.3 mH
Stator resistance4.2 Ohm
Maximum axial force fa160 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque18.06 lbf.in (2.04 N.m) 115...480 V three phase
Maximum radial force fr900 N 1000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution262144 points/turn

Product details

Overview

The SH30702P1AA3000 is a Schneider PacDrive 3 servo motor with 3 poles, three-phase winding, delivering 2.04 N.m continuous torque and a top speed of 8000 rpm. It carries an absolute single-turn Hiperface DSL encoder resolving 262144 points per turn, is sealed to IP65, and terminates in a rotatable right-angle connector.

Power output depends on supply: 610 W on 230 V single-phase, 1130 W on 400 V or 480 V three-phase, so the motor's full rating is only available on a three-phase line. Max current is 11.8 A; switching current is 2.9 A — the lower switching figure reflects the drive's PWM switching capability, not the motor's continuous draw.

Compared to the MH30701P01A2200 (5 poles, 5.97 A max), the SH30702P1AA3000 offers 3 poles and a higher 11.8 A current ceiling, suiting it for higher-torque-density applications at lower speeds.

MPN
SH30702P1AA3000